Mobile
Log In Sign Up
Home > english-chinese > "加热段" in Chinese

Chinese translation for "加热段"

bringing-up section
heat up section
heating coil section
heating section
heating zone
tonnage zone


Related Translations:
加热:  heat; warm; heat additive; heating; heat(ing) up; warming; warmup; warming-up 短语和例子把它放在火盆上加热 heat it over a brazier; 把熔炉加热到1,800度 heat the furnance to one thousand eight hundred degrees; 先
加热线:  heater wire
电子束加热:  electron beam heating
加热饭:  heater plate
放热加热:  exothermic heating
前缘加热:  leading edge heating
加热柜:  heating container
加热速度:  firing rateheat rateheating rateheating speedheating velocityrate of heating
加热凝结:  heat-set
声加热:  acoustic heating
Example Sentences:
1.No . of heating section of machine barrel
机筒加热段
2.No . of heating section of mold head
模头加热段
3.Selective heating zone ( 8 , 10 , 12zones ) allow wide variation of profile settings
选择性的加热段( 8 、 10和12温区)为外形设置的变化提供很大空间
4.Double - deck stainless steel inner in heating section , and automatic radiator system fitting in sloww - cooling sect
加热段双层不锈钢内胆,缓冷段有自动散热系统装置。
5.The proper temperature setting differs depending on type of resin material , but it must be abide by a rule that temperature setting should diminish in step 10 . c from nozzle to feeding resin material position
加热段温度设定必须按照产品所使用的原料的不同而不同,但却必须遵循一个这样的规则,即由射口筒到进科段温度是逐步递减的.且递减温度是以10 .度为单位
6.In this model , the velocity was controlled below50 m / s so that it is easy that the temperature of outlet propellant exceeds 1000k . by the measure of advancing the melting point of metal panel to 3000k , the temperature of outlet propellant even could be close to the very high temperature of the metal panel . it is very active to improve the capability of the whole propulsion system
在本文模型中,将管道内工质的流速控制在50m / s ,热交换器的出口工质温度就能够提升至1000k以上;提高换热器高温加热段的金属平板熔点到3000k以上,完全可以将工质出口温度提升至接近金属平板的温度,这样可以大幅度提高推进系统的性能。
7.Two heat - pipe with the same construction are produced by the special and common working fluid . during the experiment , the comparison of temperature distribution starting speed and transmit heat speed are tested , the effect of different heat length is observed at the same time . through compared and analyzed results of the test , its heat - transfer performance is known initially
本文首先对这种未知物性的特殊工质进行了实验研究,把特殊工质和一种以知物性的普通工质制成两根结构相同的热管,在同样条件下进行温度分布、启动和传热速率等性能对比实验,同时观察了不同加热段通过实验结果的对比和分析,对这种特殊工质的传热性能有了初步了解。
8.What ' s more , the theory analysis and experiment research on the performances and applications of the components of inorganic heat transfer are also carried out . in the second , the paper carries out an application research on this technology in the field of waste heat recovery , especially on the structure of equipment and the efficiency of heat recovery
理论分析和实验表明,无机传热元件具有奇特的传热性能和效果;无机传热元件加热段的长度对加热段的平均换热系数有明显的影响,加热段长度越短,换热系数越高;无机传热元件的工质充填量仅为碳钢-水热管的1 / 10左右,其具有的传热性能却优于碳钢-水热管。
Similar Words:
"加热调节" Chinese translation, "加热调节器" Chinese translation, "加热调制" Chinese translation, "加热定型" Chinese translation, "加热度日" Chinese translation, "加热尔" Chinese translation, "加热尔峰" Chinese translation, "加热发色" Chinese translation, "加热阀" Chinese translation, "加热阀恒温器" Chinese translation