| 1. | Temperature difference in the inlet of the accelerating tube
加速管入口温度违 |
| 2. | Physical design of 2 mev standing wave accelerating tube
驻波加速管物理设计 |
| 3. | The common problems and routine maintenace of magnetron and accelerating tube
磁控管与加速管的常见问题及日常维护 |
| 4. | The resonance frequency of the accelerating tube is synchronizing with the cooling water temperature
加速管共振周波数冷却水温度同期。 |
| 5. | Is the unit that supplies cooling water with temperature stability of 0 . 05 to prevent temperature variation in various equipment such as light radiation unit accelerating tubes , high - frequency acceleration cavities and rf power sources
精密温调装置放射光设备加速管高周波加速空洞rf电源等机器温度?动守温度安定0 . 05 |
| 6. | On the other hand , in the new system the heater is set up directly in front of the accelerating tube so that stable cooling water can be supplied , because temperature can be roughly uniform as the lowest portions of the unstable temperature through heating
?来冷却冷却水温度测定热交换器冷水量三方弁调节。当社加速管直前设不安定温度谷间加热安定冷却水供给可能。 |
| 7. | A new high power microwave source , the axial acceletron is presented in this paper . compared with the radial accelectron , an acceleration region is added after the diode / oscillator and radial acceleration is change to axial acceleration . the bunching and radiation of the electron beam in the device are investigated
最后，我们提出了一种新的高功率微波器件? ?轴向加速管，与径向加速管比较，有两个不同：在二极管/共振腔后加一个加速段，并将径向加速改为轴向加速。 |
| 8. | The couplers of accelerator structures are important components of electron knear . the efficient delivery of power from rf sources to accelerator structures depends crucially on the coupler cavity . the input coupler cavity is to be well matched , that is to say , it must have proper coupiing . and it must be tuned to the synchronous frequency . in this way , we can obtain the maximum power . in the past , the decision of the coupler cavity dimensions is very difficult
加速结构的输入耦合腔是电子直线加速器的重要组成部分。功率从功率源输送到加速管中，就依赖于输入耦合腔。输入耦合腔在整个结构中必须有良好的匹配即有恰当的耦合度，还必须工作在谐振频率。 |
