| 1. | Uniaxial tension and cyclic deformation behavior of 16mn zn laminated aseismic composites
抗震复合材料的单向拉伸与循环变形行为 |
| 2. | The quasi - superplasticity of as - cast lead brass was studied by monodirectional elongation experiment
摘要采用单向拉伸对铸态铅黄铜进行了准超塑性研究。 |
| 3. | Abnormally turning of fine lath - like microstructures in low carbon microalloyed steel during mono - axis tension
低碳微合金钢微细板条状组织在单向拉伸中的反常转动 |
| 4. | The complex stress calculation formula , after starting of necking in simple tension experiment , is deduced in the paper
导出了单向拉伸试验颈缩开始后复杂应力的计算公式。 |
| 5. | In simple tension experiment , the stress - strain relationship submits hook ' s law within the limit of proportionality
摘要单向拉伸试验中，在比例极限内，应力应变关系服从胡克定律。 |
| 6. | Tests consist of three parts : material property test of panel , slippage coefficient test of bolt connection and cyclic load test of end - plate connections
试验共分3部分：钢板单向拉伸试验；连接抗滑移系数试验和端板连接循环加载试验。 |
| 7. | The microstructure was formed in the surface of the metal coating / polymer composites in the condition of monoaxial stretching and plane compression
摘要在单向拉伸和平面压缩金属涂层聚合物复合体系的条件下，在体系的表面形成周期性的微观结构。 |
| 8. | The fundamental solutions for an infinite plate with an elliptical inclusion under uniaxial tensile stress are given by using the muskhelishvili " complex potentials and progression method
运用muskhelishvili复势理论，采用级数法得到了单向拉伸状态下，含有椭圆夹杂的均匀无限大平板的基本解。 |
| 9. | Firstly uniaxial tensile tests were carried out on dog bone specimen of the alloy . at 450 , it exhibits more than 300 % of elongation prior to fracture under const strain rate of 2 10 - 3s - 1
首先进行单向拉伸试验并进行有限元模拟,得到在450 ,以2 10 - 3s - 1等应变速率变形,有超过300 %的最大延伸率。 |
| 10. | Abstract : an approximate method has been used in this paper to calculate the stress concentration factor for a finite wide plate with a small circular hole under tension . the stress concentration factor has been obtaind analytically
文摘:采用一种近似方法，对含偏心小圆孔的有限宽板条在单向拉伸时孔边的应力集中系数进行了求解，得出了解析表达式 |
