Chinese translation for "单相区"

monophase field
one phase region
single phase region
single-phase area

Related Translations:

单相运行:  single phasingsinglephasing

单相保护:  protection against single-phasing

单相转子:  single phase rotorsingle-phase rotor

单相状态:  single phase conditionsingle-phase behavior

单相交流电:  single phase alternating currentsingle-phase alternating current

单相电机:  single phase machinesingle-phase machinesinglephasemachine

单相障碍:  unipolar disorder

单相吹风机:  electric blower single-phase

单相发电厂:  single-phase power station

单相边界层:  single phase boundary layer

Example Sentences:

	1.	The morphology of the p phase is in the forms of plate , flower or near - round 生长初始端为+相区。晶锭中间部分为单相区。
	2.	3 and y or 8 phases are crystallized at the end . between them exists a pure phase region 晶锭的初始段为+两相区，末段为+或多相区，两段之间为单相区。
	3.	Among them , 3 plates always lies in the grain boundaries . following the initial region , single p phase region and in2tes phase region are formed in order 在晶锭末端形成in _ 2te _ 3单相区，该相区晶界处有te夹杂相。
	4.	The experimental results show that the variation range of cd content in different sections cut along the axes increases with the growth process , which reflects that the interface depth also becomes larger 表明生长界面形态随着生长的进行逐渐加深。理论计算出p单相区的液固界面深度在生长过程中的变化规律与实验结果相一致。
	5.	On the basis of the insertion structure mathematical model , the modeling method for single - phase section of boilers is improved and a new modeling method chain structure modeling method based on lumped - parameter is presented 在嵌套结构参数模型的基础上，对锅炉单相区的数学模型加以改进，提出了链式结构的集总参数数学模型，并对其进行仿真。
	6.	Based on the experiments , the simulation of the heat exchanger and scroll compressor was accomplished which also offered a favorable condition to the establishment of the whole gwshp methods were used to improve the veracity and astringency of the model , such as : dividing the condenser into several tiny segment with equal area ; separating the condensing process into single - phase region and double - phase region ; the comparing result showed that most of the error between the data of simulation and experiment was within 5 % while the maximal error was 8 . 35 % 在建模过程中，从大量蒸发和冷凝的换热关联式中，通过与实验数据的比较找出了与实验结果最为接近的换热关联式在建模过程中，针对冷凝器及板式换热器的特点，采取将冷凝器按面积分成若干个微元段，并将冷凝过程分成单相区和两相区的方法。同时对涡旋压缩机进行建模和分析同时在热力学平衡基础上与实验数据比较，经过验证，对于换热器模型，模拟计算与实验结果的误差一般都在5以内，最大为12 。

Similar Words：

"单相平衡" Chinese translation, "单相汽冷式变压器" Chinese translation, "单相桥式半可控整流器" Chinese translation, "单相桥式整流电路" Chinese translation, "单相桥式整流器" Chinese translation, "单相曲线" Chinese translation, "单相全波x线发生器" Chinese translation, "单相全波可控整流器" Chinese translation, "单相全波连接" Chinese translation, "单相全波桥式整流电路" Chinese translation