Mobile
Log In Sign Up
Home > english-chinese > "压区" in Chinese

Chinese translation for "压区"

nip
Example Sentences:
1.Balanced depth of compression zone
界限受压区高度
2.Depth of compression zone
压区高度32
3.The gas drainage technique with short boreholes in stress reduced area for mining face with outburst hazard
高突工作面卸压区浅孔抽放技术
4.Research on technology of draining methane off shallow borholes in a stress - relaxation area of working face
工作面卸压区浅孔瓦斯抽放技术研究
5.When the ductility of steel bar is bad , the ductility of section will be bigger with the improvement of the ductility of steel bar
钢筋延性较好,则构件截面延性随截面相对受压区高度的减小而增大;钢筋延性较差,则构件截面延性由钢筋延性控制。
6.According to simulated results , we can get the range of side pressure relief at the mining face , at the upper coal or the lower coal under the peculiar condition
根据模拟结果得出:特定开采条件下,上部或下部不同煤层采煤工作面侧向却压区范围。
7.9 pieces of rc test beams were fabricated , the fbg sensors and strain gauges were mounted in the tensile steel , compress concrete and cfrp of the tested beams
制备9根rc试验梁,将fbg传感器与电阻应变片同时预置于实验梁内(受拉钢筋、压区混凝土及碳纤维复合材料中) 。
8.Then limiting load is decreased . ( 6 ) horizontal load can increase the coefficients of the modulation of moment when value of is little while decrease it when is large
( 6 )在中支座截面相对受压区高度较小时,有水平荷载的框架其弯矩调幅系数要大于只有竖向荷载的框架。
9.The following conclusions are reached . ( 1 ) the relative height compressive zone of section or the axial force is bigger , the rotational capacity of the section is weaker
得出了以下主要结论: ( 1 )截面相对受压区高度、截面所受轴力显著地影响预应力框架梁截面的延性。
10.This model transacts and calculates pull and press section of reinforcement concrete by different methods : the reinforcing steel bar element model is adopted at pull section and the reinforced concrete enblock model is adopted at press section
该模型用不同方法处理计算钢筋混凝土拉区和压区:拉区钢筋采用杆件单元模型,压区钢筋混凝土则采用整体式模型。
Similar Words:
"压侵蚀" Chinese translation, "压青" Chinese translation, "压轻质砂加气混凝土块材及板材连接" Chinese translation, "压球触地" Chinese translation, "压球机" Chinese translation, "压区挡板" Chinese translation, "压区挡板,压区防护板" Chinese translation, "压区防护板" Chinese translation, "压区宽度" Chinese translation, "压区线压力" Chinese translation