Mobile
Log In Sign Up
Home > english-chinese > "变形率" in Chinese

Chinese translation for "变形率"

deformation rate

Related Translations:
扭曲变形:  distortional deformationtravesty - paragon
屈服变形:  yield deformation
变形物镜:  anamorphotic lens
纸张变形:  paper distortion
变形能力:  ability to deformdeformabilitydeformation propertyformability
变形角:  angle of deformationdeformation angle
等温变形:  isothermal deformation
变形分析:  deformation analysis
抵抗变形:  resistance to deformationresistance to distortion
变形再生:  morphallactic regenerationmorphallaxiamorphallaxis
Example Sentences:
1.If the compliances are not equal in the three orthogonal directions, it is anisoelastic .
如果在三个垂直方向的弹性变形率并不相等,即它是不等弹性的。
2.Probing into residual deformation rate and hydraulic test of volume of gas bottle
气瓶容积残余变形率及水压试验探讨
3.When ignoring the influence of deformation , the constitutive relation can be reduced to that of jaumann derivative
当忽略变形率的影响时,欧拉表述的大变形固结本构方程可退化为通常的jaumann率形式。
4.The results show that the bonding is good when the temperature , two passes deformation ratio of rolling are 1 250 c , 50 % respectively
结果表明;轧制温度为1250c 、两道次的轧制变形率为50 %时,界面结合较好。
5.Abstract : in this paper , the generalized variational principle of ela stic and plastic problem with finite displacement is derived by means of semi - in verse method
文摘:利用半反推法,导出了弹塑性有限变形率形式的广义变分原理
6.Deformation of diffusion bonded parts was correlated with pressure application . m ethod o f controlling deformation and obtaining non - deformation bonding was proposed
针对实际构件,深入分析了加压方式和变形率的关系,并提出了控制变形量得到无变形接头的方法。
7.Epe compression and transformation rate are the lowest in same type of material . suitable for repeatedly crash buffering . long distance transport of precise equipment , electronic and computer
Epe压缩变形率,为同类包材中最低体积最小,适合多次撞击缓冲保护,精密仪器,电脑电子系列长途产品运输。
8.Vacuum diffusion welding of refractory steel to heat resistant alloy was investigated in this paper . the effect of welding parameters on the deformation ratio of joints was examined
针对耐热合金与耐热钢的真空感应扩散焊,研究了扩散焊连接工艺参数对接头变形率的影响、接头变形率与接头性能的关系以及不同接头变形率的微观形态。
9.Methods of test for flexible cellular materials - method 17 - determination of tear strength of flexible cellular material with an integral skin - method 18 - determination of compression set under humid conditions
软质微孔材料试验方法.第7部分:方法17 :用整皮测定软质微孔材料撕裂强度方法.方法18 :在潮湿条件下测定加压变形率方法
10.The influences of the temperature , speed and deformation ratio of rolling during producing composite stainless steel band by inversion casting on the bonding between the mother band and solidified layer were investigated
摘要针对用反向凝固法生?不?钢复合带的工艺,研究了轧制温度、轧制速度及轧制变形率对母带与凝固层间结合的影响。
Similar Words:
"变形铝及铝合金化学成分" Chinese translation, "变形铝及铝合金牌号表示方法" Chinese translation, "变形铝及铝合金制品低倍组织检验方法" Chinese translation, "变形铝及铝合金制品显微组织检验方法" Chinese translation, "变形铝及铝合金状态代号" Chinese translation, "变形孪晶" Chinese translation, "变形轮辋" Chinese translation, "变形裸子植物" Chinese translation, "变形镁合金显微组织检验方法" Chinese translation, "变形迷彩涂料" Chinese translation