| 1. | Optimum design of microwave absorbing coating containing carbonyl iron powder
羰基铁粉吸波涂层的优化设计 |
| 2. | The impact of magnetizing treatment on the absorbing property of the absorbing coat
磁化处理对吸波涂层吸波性能的影响 |
| 3. | The absorbing properties are hardly changed when further coated with the infrared camouflage coatings
雷达吸波涂层与可见光、红外隐身涂层复合后，其吸波性能基本保持不变。 |
| 4. | The permittivity and reflectivity of absorbing coating of moo3 - v2o5 - p2o5 - fe2o3 glasses doped with si / c / n nano powder were researched
研究掺杂纳米粉体的吸波涂层的烧结工艺及其介电常数和反射率。 |
| 5. | The results of optimization show : it will increase the coatings " ability of absorbing greatly if the thickness and the electromagnet parameters of every layer are matched properly
本文关于吸波涂层优化设计的分析结果表明，恰当地将各层的厚度和介电常数组合，可以极大的提高吸波涂层的吸波效果。 |
| 6. | Base on the effective permittivity forecasting formula of spherical core - shell type inclusions , the theory frame of optimum design of absorbing coating is constructed ; the optimization of single layer and double layers is done
基于核壳型球形颗粒的等效介电常数的预测公式，建立了吸波涂层优化设计理论框架，并对单层和双层吸波涂层进行了优化设计。 |
| 7. | Characteristics of attenuating and absorbing of super wideband radar surface wave by means of radar absorbing coatings as well as radar absorbing coatings combined with frequency selective surfaces are studied and then reported here
研究了雷达吸波涂层对宽频段雷达表面波衰减吸收的规律以及频率选择表面与吸波涂层相结合的复合吸波涂层对宽频段表面波衰减吸收的规律。 |
| 8. | The design of millimeter - wave / centimeter - wave compatible absorbing coatings with double - layer structure is analyzed based on the theory of electromagnetic in this article and series of experiments are conducted according to the analysis
摘要以电磁理论为基础，对两层结构的毫米波厘米波兼容吸收涂层的设计方法进行了分析，并根据理论分析的结果进行了系列吸波涂层的实验。 |
| 9. | A triple - layer radar absorbing coatings composed of dielectric and magnetic materials were prepared according to resistance matching principal , which is then further coated with an infrared and visible light camouflage coatings
摘要依据阻抗匹配原理制备了一种3层雷达吸波涂层，并在吸波涂层表面喷涂一定厚度的可见光、红外伪装涂料，比较了喷涂伪装涂料前后涂层吸波性能的变化。 |
| 10. | In this paper , we have done research on the effective permittivity of ellipsoid inclusions and spherical core - shell type inclusions , using the method of micromechanics theory ; sequentially optimized design of absorbing coating
本文利用微观力学理论方法，对椭球形颗粒夹杂复合材料和球形核壳型颗粒夹杂复合材料的等效介电常数的预测进行了研究，并对吸波涂层进行了优化设计。 |
