| 1. | The distance between orifice groups is another parameter associated with stability .
喷孔组合之间的距离是与不稳定性有关的另一参数。 |
| 2. | As previously mentioned, spacing of the orifice groups with relationship to each other is important .
如前所述，喷孔组合的相互间距是重要的。 |
| 3. | Improvement of the orifice discharge coefficient may not result in stability improvement as illustrated in one test series .
由一系列的试验说明，喷孔流量系数的改善并没有导致稳定性的改进。 |
| 4. | The orifices of this nozzle are almost chocked up with carbide
这个油嘴的喷孔几乎被碳化物堵死。 |
| 5. | Ratio of nozzle hole length nozzle diameter
喷孔长径比 |
| 6. | Nozzle hole area
喷孔面积 |
| 7. | Chapter 14 - natural gas fluids measurement , section 3 - concentric , square - edged orifice meters , part 2 - specification and installation requirements
第14章:液化天然气的测量.第3节:同心式方缘喷孔流量计.第2部分:规范和安装要求 |
| 8. | The operation principle of a automatic flow - rate detecting system of fuel injector is introduced and the design of hardware and software is presented
摘要介绍了喷油嘴四喷孔流量自动检测系统的工作原理，给出了系统硬件和软件设计。 |
| 9. | The system can fulfil the demands for scientific research of the flow - rate detecting with the features of reliable detected data . speedy measuring , better stability and repealabitity
该自动检测系统具有检测数据可靠，测量速度快，稳定性高，重复性好的特点，能够满足四喷孔流量检测科学研究的需要。 |
| 10. | Simulation results show that better atomization can be realized by enhancing the cavitation intensity via increasing the injection pressure difference or decreasing the nozzle inlet round angle - radius ratio
通过模拟计算可知，提高喷射压差和减小喷孔入口圆角半径都可以提高空穴强度，同时也发现提高喷孔长径比可以使空穴在喷孔出口截面上分布更为均匀。 |
