| 1. | The afterflow represents a production of kinetic energy which becomes convered into a pressure wave when the outward flow of water is reversed .
残余塑性流动代表在外向水流返回时动能变为压力波的一种结果。 |
| 2. | Finite element analysis of casing damage in plastic flow formation
塑性流动地层套管破坏的有限元分析 |
| 3. | Non - coaxial plastic flow theory in multi - dimensional stress state
复杂应力状态下岩土体的非共轴塑性流动理论 |
| 4. | The studies of material two - dimensional plastic flow in friction stir welding
搅拌摩擦焊焊缝材料二维塑性流动研究 |
| 5. | Metal flow behavier in friction stir welding of lf6 aluminum alloy and ld10 aluminum alloy
6搅拌摩擦焊的金属塑性流动 |
| 6. | Sbs elastomers do not depend on a high shearing rate to achieve the injection viscosity , but sebs elastomers are vice - versa
Sbs弹体无需依赖高剪切率来达至塑性流动力, sebs弹体却需依赖高剪切率来达至塑性流动力 |
| 7. | By using one - dimensional finite different hydrodynamic code coupled with four spall models , spall in ductile metal has been studied
摘要在平面一维弹塑性流动有限差分计算程序中加入4种延性金属层裂模型，对平板撞击层裂实验进行数值模拟。 |
| 8. | Emform423 contains special extreme pressure additives to extend dielife and promote smooth , even floe of metal and quick , clean release of parts from the dies
Emform423含有特殊的极压添加剂，可延长模具寿命；并能形成匀顺的金属塑性流动，从而使工件得以迅速、洁净地自模具脱离。 |
| 9. | In addition , the constitutive models included in flac - 3d are deep into research , and th e stress increments are corrected in terms of the plastic strain increment while occurrence of plasticity flow
此外，还对flac - 3d内嵌的本构模型深入研究，塑性流动发生时塑性应变增量对应力增量的修正。 |
| 10. | Firstly , the effect of initially applied strain is that , when it rises , the fiber axial stress decreases , indicating less efficiency in the stress transfer across the interfaces
轴向最大应力的大幅度减少意味当基体的初始塑性流动增加时，基体的应力传递效率大幅度降低，需要增加纤维长度来完成应力传递。 |
