Chinese translation for "塑流"

creep fluidity
plastic flow
plastic fluidity
yielding flow

Related Translations:

塑模:  diemoldingmoulders

蜡塑术:  ceroplastic

塑象灰泥:  stucco

品牌重塑:  rebranding

塑能系:  evocation

吹塑操作:  blow molding operationblow moulding operation

右塑物质:  plastic

挤压压塑:  compacting by extrusion

塑石师:  stoneshaper

弹塑界面:  elastic plastic interface

Example Sentences:

	1.	Plastic flow of steel 钢的塑流
	2.	Because of the complexity of the soft foundation , it is much difficult to calculate the additional settlement caused by the plastic flow accurately 由于软土地基的复杂性,要准确计算塑流引起的附加沉降有相当大的难度。
	3.	Compound deformation on right dam abutment is the result from three deformation modes acting together . the three deformation modes are pressing - plastic fluxion rip mode , toppling - tensional and shearing fracture mode , stress release - tensional fracture mode 右坝肩复杂变形是压致?塑流拉裂、倾倒?张剪和卸荷?张裂破坏三种变形模式复合作用的结果。
	4.	Research result indicated that on the basis of all kinds of tensional fracture , intricate deformation phenomenon is controlled by three kind of fracturing failure , such as compression - plastic flowing fracture , career - fracturing and relief - fracturing and their organic assemblage in right dam abutment 研究结果表明，右坝肩岩体以各类张裂为主要表现形式的复杂变形现象，受控于压致-塑流拉裂、倾倒-张裂及卸荷-张裂等三类张性破坏及其有机的组合。
	5.	However , in the existing design criterion , the calculation methods which base on one - dimensional consolidation theory can ’ t take into account the additional settlement caused by the lateral displacement that generated by the plastical flow of the soft foundation . it leads the calculation final settlement to be less than the actual settlement which leads the settlement after construction completed to be on the big side , and affect the project ’ s quality 然而,现有设计规范中的基于单向固结理论的沉降计算方法,不能考虑软土地基由于塑流引起的侧向位移所产生的附加沉降,致使设计计算的最终沉降量小于实际沉降量,造成工后沉降偏大,影响工程质量。

Similar Words：

"塑料楦" Chinese translation, "塑料橛" Chinese translation, "塑料砑光机" Chinese translation, "塑料铠装电缆" Chinese translation, "塑料踝足支具" Chinese translation, "塑流,总径流量" Chinese translation, "塑流比" Chinese translation, "塑流带" Chinese translation, "塑流定律" Chinese translation, "塑流极限" Chinese translation