| 1. | At present , we made au or ag contacts on the superconducting film in order to connect with the outer circuit
目前常采用的与外接电路的连接方法是在超导体上制作金属au或ag的接触点，然后用引线与外电路连接。 |
| 2. | A theoretical formula was applied to this process so that the open circuit voltage could predict the limit of deoxidization reaction
通过电池电动势与时间关系的数学模型，得出外电路电压与熔池中氧含量的关系，从而根据外电路电压可以预测脱氧反应进行的程度。 |
| 3. | The npc cell was assembled by dropping an electrolyte solution into the space between the tio2 / dye electrode and the counter electrode and connecting an external circuit
Tio _ 2染料电极与对电极组装，在两者之间滴上电解质溶液，连接外电路，完成npc电池的组装。 |
| 4. | In order to understand the mechanism of short - circuited deoxidization , an experiment was designed and performed for measuring the relation between the open circuit voltage of a deoxidization device and the process time
摘要为了解固体电解质脱氧的内部机理，对氧化锆固体电解质电池短路脱氧过程中的外电路电压随时间的变化进行了研究。 |
| 5. | Based on the others " research , a sapphire resonator working at 12ghz was improved and fabricated . the coupling of resonant circuit and the match of the outside circuit are analyzed . and the automatic test system is also built
本文在前人的研究基础上，改进制作了一个工作在17ghz附近的蓝宝石介质谐振腔测试座，分析了谐振回路的耦合及外电路的匹配问题，并构建了自动测试系统。 |
| 6. | Comparing the physical model and mathematic model , the optimization of its design can be realized . simulation and optimization results are presented , focused on the basic knowledge of the system identification , which can be used in the future
辨识和优化的结果着重分析了系统的传输函数，使其接近理想的低通系统传输函数，用这种不改变物理器件而改变外电路的方法可实现多光源laps ( mlaps ) 。 |
| 7. | Experimental results show that the bistable of tuned substrate self - bias was determined by discharge gas pressure , discharge power and tuning circuit parameters etc . the bistable exists is because of there is capacitive coupling in icp system and sheath capacitance is nonlinear
实验结果表明这种跳变回滞现象与等离子体的放电气压、射频功率以及调谐外电路的参数等多种因素密切相联系。而产生跳变回滞现象的原因是icp中存在容性耦合以及鞘层电容具有非线性特性。 |
