| 1. | Railway applications - wheelsets and bogies - axles - product requirements
铁路设施.轴副和导轮转向架.轴.产品要求 |
| 2. | Pay - off guid sheave stand
放线导轮架 |
| 3. | Assemble die adopt tungsten steel die , guide wheel have defend jump wire device
9过线模采用钨钢模，过导轮处设有防跳线装置。 |
| 4. | Steady quality and excellent durability are suitable for any type of mechanical auxiliary pilot wheel
品质稳定耐用佳适用各种机械辅助导轮。 |
| 5. | Repairing technical requirement for special equipment of bucket dredgers part 2 : guide wheel of bucket chain bridge
链斗挖泥船专用设备修理技术要求第2部分：斗桥导轮 |
| 6. | The results also display the impeller ' s good hydraulic properties and the vaned diffuser ' s imperfect hydraulic properties and low efficiency
计算结果还显示：潜油泵叶轮有较好的水力性能，而潜油泵导轮的水力性能是不完善的，效率较低。 |
| 7. | The derrick to be laid down on deck , cargo blocks , span takles , guide rollers and all moving parts of derrick of derrick to be dismantled . cleaned and greased with special grese
吊杆放置甲板上，吊货滑车，调节跨幅复式滑车，导轮及吊货杆上所有活动部件拆开，清洁，加优质润滑脂。 |
| 8. | The internal flow field in submersible centrifugal pump is researched based on cfd , and numeric results of the impeller and vaned diffuser trader three different operating conditions are discussed and analysed
摘要采用cfd方法研究了潜油离心泵的内部流场，讨论分析了3种不同工况下叶轮和导轮的数值计算结果。 |
| 9. | The pump wheels , turbine wheels , and stators generated by the different blade parameter profiles were compared and the fundamental law of the converter performance versus the blade angle profile was derived
通过对不同参数变化规律生成的泵轮、涡轮、导轮的叶型进行对比分析，总结出液力变矩器叶片角变化对液力变矩器性能影响的基本规律。 |
| 10. | The results of computation show that the axial force on the impeller of pump pushes the pump impeller towards turbine , that axial force on the turbine makes the turbine close to the pump impeller , and axial force on guide roller propelles guide roller towards the pump impeller
实例计算发现，泵轮的轴向力拉动泵轮向涡轮靠近；涡轮的轴向力拉动涡轮向泵轮靠近；导轮的轴向力拉动导轮向泵轮靠近。 |
