| 1. | Footwear . test methods . strength of end pointgs
鞋类.试验方法.鞋尖部强度的测定 |
| 2. | Experimental research of an axial flow compressor performance with stepped tip gap casing configuration
梯状尖部间隙机匣处理对轴流压气机性能影响的实验研究 |
| 3. | The maximum stress was on the apices and the stress on the cervical part was lower
种植体应力主要为均匀分布的压应力，最大应力位于种植体根尖部，颈部应力相对较小，未见明显弯曲应力。 |
| 4. | Because black results in no displacement or bump , this ensures that the top and bottom of the screw will be smooth
因为黑色结果是没有置换或凹凸的，这保证螺丝钉的顶部和尖部是平滑的。 |
| 5. | The maximum draw stress located on the lingual apex , while the maximum compressive stress located on the lingual crest of the ridge
最大拉应力位于舌侧根尖部，最大压应力位于舌侧牙槽嵴顶。 |
| 6. | This small waist dao in qing dynasty has not bad appearance . the tip should have reversed blade . pity it ' s not an original scabbard
这把清代小腰刀品相不错，尖部应有反刃。可惜刀鞘不是原配。 |
| 7. | This pattern of multiple caseating granulomas primarily in the upper lobes is most characteristic of secondary ( reactivation ) tuberculosis
原发于肺尖部的多个干酪样肉芽肿是继发性肺结核的最典型特征。 |
| 8. | The shading network connected to thread uses an expression to drive the displacement threading and a ramp to prevent the threading from appearing on the head and the tip of the screw
这个材质网络用一个表达式连接到螺纹去驱动螺纹的置换和一个渐变，去防止螺纹在顶端出现和在螺纹尖部出现。 |
| 9. | Only axisymmetric layout of tip gap can improve mass flow range , namely , all asymmetric casing configurations can not improve compressor performance and stability
由实验分析得知，只有在转子尖部间隙为轴对称时，才有可能改善转子的性能；非轴对称形式，即尖部间隙周向的变化，只能恶化转子的性能。 |
| 10. | The effects of layout of tip gap clearance on axial compressor rotor performance and stability have been investigated experimentally . a single - stage compressor rotor with no inlet guide vanes was tested under subsonic condition
本文用实验的方法对压气机转子尖部间隙沿轴向周向的布局进行了详细的研究。 |
