| 1. | Stress control triaxial compression apparatus
室内土工试验应力控制式三轴压缩仪 |
| 2. | Stress control tubing
应力控制管 |
| 3. | Stress control tape
应力控制带 |
| 4. | Standard practice for strain - controlled axial - torsional fatigue testing with thin - walled tubular specimens
带有薄壁管状样品的应力控制轴向扭曲疲劳检验的标准实施规程 |
| 5. | Two pieces of improvement on the crack width control method using nominal tensile stress for prestressed concrete flexural member
对用名义拉应力控制预应力混凝土受弯构件裂缝宽度方法的2点改进 |
| 6. | A comparison of the electric field distribution in a cable termination with several different stress control tubes is presented
摘要利用时域有限元方法分析了含不同应力控制管时的电缆终端电场分布。 |
| 7. | A comparison of the electric field distribution in cable terminations with several different stress control tubes is investigated under impulse voltage
利用暂态有限元方法分析了含不同应力控制管时的电缆终端冲击电压下的电场分布。 |
| 8. | Due to the outstanding shear rate control of the mcr series it is possible to measure a full flow curve with just one revolution of the excentrically rotating sphere
由于mcr系列精湛的剪切应力控制，只需一个非同心的旋转球体即可测量一个完整的曲线。 |
| 9. | The result reveals that the stress control tube comprising a composite structure of the nonlinear resistive and capacitive material shows the best performance in improving electric field distributions in cable terminations
分析结果表明，采用由电容性和非线性电阻性材料复合绝缘结构的应力控制管时，电缆终端的电场分布最为均匀。 |
| 10. | Stress generating mechanisms was discussed . the residual stress of 40 - bilayer mo / si multilayers in a high reflectivity multilayer was - 500 mpa ( compressive ) , stress generating cause may be attributed to interfacial diffusion
重点研究了多层膜的残余应力控制技术；通过对单层膜以及多层膜的应力状态分析，得出应力主要是由膜层之间的贯穿扩散引起的。 |
