| 1. | Maintain scrap rate at an acceptable level
保持废品率在一个合理的水平。 |
| 2. | The product quality is comparatively stable and the wastage is low
产品质量较稳定，废品率低， |
| 3. | Rejection rate can be greatly reduced by employing this new developed device
采用这种新装置可以大大降低废品率。 |
| 4. | Adoption of this new equipment is very useful in producing fewer waste products
采用这种新装置可以大大降低废品率。 |
| 5. | Corrective / preventive action coordination for quick responding customer complaint or internal abnormal scrap rate
协调纠正预防措施，对客户投诉或内部异常废品率作出迅速反应。 |
| 6. | 4 . the whole course plc is controlled by intellectualization to ensure normal operation . thus products have stable quality with low waste
4全过程plc智能控制，设备运转每个循环过程一致，产品稳定性高，废品率低。 |
| 7. | The mehods for the traditional industrials marking are not only inefficient and unaesthetic , but also short of long - term stability and high for the rate of waster
传统的工业标记打印效率低、不美观、稳定性差、废品率高。 |
| 8. | 2 . adopting the technology in combination of machine , electricity and fluid to ensure normal operation . thus shaped products have stable quality with low waste
2采用机电液一体化结合的技术，使设备运转的每一个循环过程一致，成型产品稳定性高废品率低。 |
| 9. | Adopt double work position unwinding without stoppage . this can give full play to production efficiency of equipment and decrease the waste product rate of equipment greatly
采用双工位不停机放卷，可以充分发挥设备的生产效率，可以大幅度降低设备的废品率。 |
| 10. | In regards to qc department , we should keep our wastage level to a minimal and implement our internal corrective action plan to avoid any more quality issues
在质量控制部门上，我们将把废品率控制在最低水平上，并且实施内部校正行动方案以避免质量问题的产生。 |
