| 1. | Study on the mechanism about formation of passive film on copper in ch3 nh2 - k3 fe
铁氰化钾抛光液中铜钝化成膜的机理研究 |
| 2. | In this study , the suitable preparation conditions were experimentally determined
通过实验,确定了动态lbl成膜的适宜条件。 |
| 3. | Influence of energy flow density of ion current on growth of diamond - like carbon thin films
离子能流密度对类金刚石薄膜成膜的影响 |
| 4. | Effect of basicity of poly - aluminium inorganic macromolecule solution on preparation of - al203 membrane
聚铝无机高分子盐基度对成膜的影响 |
| 5. | Standard test methods for drying , curing , or film formation of organic coatings at room temperature
室温下有机涂料干燥固化或成膜的标准试验方法 |
| 6. | The important action of auxiliaries to production , stockpile , construction and film forming of water - home coatings were introduced
摘要阐述了助剂对水性涂料的生产、贮存、施工以及成膜的重要作用。 |
| 7. | The effects of formation time and components of the solution on the topography of ots self - assembled molecular films were mainly studied in the experiment
实验中，主要研究了ots自组装分子膜成膜时间及反应溶剂的组成对成膜的影响。 |
| 8. | 3 a new purification method of cnts was present . the cnts films were prepared with the cnts purified by the former method , and the structures and the properties of the films were measured
提出一种新的碳纳米管（ cnts ）的纯化方法以及把用此方法纯化的cnts制备成膜的过程及性质的初步探索。 |
| 9. | ( 3 ) the simulation results of rare gas ion ( argon is used here ) sputtering metal ( al is used here ) to deposit films , which are in good agreement with the fundamental experimental results
( 3 )运用模拟程序模拟了惰性气体( ar )离子对金属靶( al )溅射成膜的过程，模拟结果符合一般的实验结果及其规律。 |
| 10. | ( 3 ) the current density is the driving force for electrochemical reaction in the thin films formation process ; the greater the current density , the quicker the electrochemical reaction , the more easily the nuclei formation , whereas the excessive current density would affect the quality of the as - grown thin films
( 3 )电流密度是电化学成膜过程中电化学反应的驱动力，电流密度越大，电化学反应越容易，晶核越容易形成，但过大的电流密度会影响成膜的质量。 |
