Chinese translation for "扩散焊接"
|
- diffusion bonding
diffusion welding
Related Translations:
扩散传输: diffuse transmission 扩散渗析: diffusion dialysisdiffusive dialysis 扩散热处理: diffusing heat treatment 扩散效应: diffusing effectdiffusion effectdiffusional effectspread effectspreading effect
- Example Sentences:
| 1. | Research on diffusion welding technology of al - li alloys without interlayer
铝锂合金无中间层扩散焊接工艺研究 | | 2. | The interfacial microstructure and properties for ti ni in diffusion bonding process
扩散焊接界面的组织和性能 | | 3. | Welded and brazed assemblies for aerospace construction . assembly of metallic materials carried out by diffusion welding . quality of welded assemblies
航空航天结构用焊接和钎焊组件.用扩散焊接法焊接的金属材料组件.焊接组件的质量 | | 4. | Abstract : this paper introduces a general review of research and development in joint quality inspection of diffusion bonding . the ultrasonic inspection methods which are widely used are described chiefly , and the application prospect of quality inspection in diffusion bonding is discussed
文摘:简述了目前国内外在扩散焊检测方面研究发展的概况，着重介绍了应用比较普遍的超声波检测法，并就扩散焊接头质量检测的应用前景等发表了作者的看法。 | | 5. | Pulse electric current heat treatment ( pecht ) developed by sodick , ltd . , of japan , is a recently developed material processing method which consists of spark plasma sintering and welding , plasma activated sintering and welding , big pulse electric current ( bpec ) diffusion welding etc . the following are basic merits of pecht : rapid heating and cooling ; short sintering or welding time ; lowering sintering or welding temperature
脉冲电流热加工( pulseelectriccurrentheattreatment ，比如烧结，焊接等)是九十年代发展起来的一种材料快速制备新技术，它包括放电等离子烧结与焊接、等离子活化烧结与焊接、脉冲大电流扩散焊接等。它具有升温、降温速度快、能在较低的温度下烧结或焊接以及时间短的特点。 | | 6. | It was found that the interfacial bonding of 93w - ofc was both the joining action of ofc / w grains and that of ofc / ni - fe binders , whereas the joining of ofc to tc4 could be seen as the mutual intense diffusion effect between ofc / tc4 and as a result cu - ti intermetallic compounds were formed at the joint . the joining of tc4 - a1 and a1 - mb2 were also attributed to the result of diffusion between elements ti - al and al - mg respectively . on the other hand , residual thermal stress and stress - induced distortion were produced at the joint simultaneously due to the difference in thermal expansion coefficient of different welding " materials
研究表明， 93w与ofc的界面连接是ofc与93w中w晶粒的连接以及ofc与93w中ni - fe粘接剂的连接共同作用的结果； ofc与tc _ 4连接界面的形成是由于ofc与tc _ 4之间发生反应扩散，并由此在二者接头处生成了cu - ti金属间化合物的中间相； tc _ 4 - al的连接与al - mb _ 2的连接则分别是其基体元素ti 、 al之间和al 、 mg之间元素互扩散的结果，另外，由于热膨胀系数的差异，扩散焊接后在不同焊件的接头处存在残余热应力并由此引起接头的形变。 | | 7. | By using diffusion welding method ( under certain welding parameters such as temperature , pressure , time and atmosphere , etc ) and employing rational structural control technique , a kind of 93w - ofc - tc4 - a1 - mb2 system flier - plate with good parallelism , planeness and high densification was prepared , which met the needs of initial design and the basic requirement of flier - plates
利用平面扩散焊接法(控制一定的温度、压力、时间、气氛等条件) ，同时采取合理的结构控制方法，成功实现了93w - ofc - tc _ 4 - al - mb _ 2的整体连接，得到了平面性好、平行精度高、整体致密的波阻抗梯度飞片，满足了设计结果和梯度飞片的基本结构要求。 |
- Similar Words：
- "扩散硅式力传感器" Chinese translation, "扩散硅式张力计" Chinese translation, "扩散过程" Chinese translation, "扩散函数" Chinese translation, "扩散焊" Chinese translation, "扩散核" Chinese translation, "扩散合金光电晶体管" Chinese translation, "扩散合金化" Chinese translation, "扩散合金化黄铜粉" Chinese translation, "扩散合金晶体管" Chinese translation
|
|
|
