| 1. | To preserve the same twist, the torque should also be the same .
为保持相当的扭转，扭矩也应该具有相同的比例。 |
| 2. | Find the required length of key based on the torque value of the gross shaft .
根据整根轴的扭矩值求需要的键长。 |
| 3. | The only load to be applied to the torsion bar is the torque m at its ends .
扭杆上的唯一载荷是扭杆两端的扭矩M。 |
| 4. | Shear force and torsion effects can be taken into account in a similar way, by the addition of further terms .
相似地，追加更多项就可以考虑剪力和扭矩的影响。 |
| 5. | The entire torque is twice the sum of all such slices, that is, twice the volume of the stress hill .
整个扭矩是所有这样的薄片的和的两倍，也就是说，整个扭矩是应力山体积的两倍。 |
| 6. | Similar comments apply to torsion if the torsional moment and twist per unit length are constant throughout a member .
如果扭矩和单位长度上扭角沿杆件为常量，则上述的结论也可以用于扭矩。 |
| 7. | Shear stresses and shear strains in prismatic members may be caused by either torsional moments, or by shear forces associated with flexure .
在等截面杆件中，剪应力和剪应变可以由扭矩引起，或者由变曲相关的剪力引起。 |
| 8. | Requires no retorquing after long cycling
经过长期循环测试后，不需要回位扭矩。 |
| 9. | Box wrenches , single end ; test torques series a
单头套筒扳手.按照a系列检验扭矩 |
| 10. | Verification regulation of torque wrenches for railway
铁路用扭矩扳手计量检定规程 |
