Mobile
Log In Sign Up
Home > english-chinese > "拧紧螺栓" in Chinese

Chinese translation for "拧紧螺栓"

to tight a bolt
totightabolt


Related Translations:
拧干:  wring out
拧牢:  ipr i be attached by screwing
拧下:  screw offscrewing outunscrewing
拧接:  screw together
拧动:  tn.pr tn.p cn. twist round make tighter by twisting
拧弯:  contort
拧松:  back-out; screw off; unscrew
拧起来:  fasten off
拧摆步:  merengue action
拧盖机:  lid tightenerscrew capping machine
Example Sentences:
1.High-strength bolts were inserted into the holes and tightened to a high preload level .
把高强度螺栓插入孔洞,同时拧紧螺栓达到高的预加载水平。
2.Add sealed shim between the two flanges and then lock down the bolt
安装时两法兰间需加密封垫片,然后均匀拧紧螺栓
3.To tight a bolt
拧紧螺栓
4.Don t tighten the bolt too much to prevent the gear broken or cut caused by expansion
在装轮时不要过度拧紧螺栓,以免轮在正常运转状况下,因材料膨胀导致轮破裂或者螺栓被剪断。
5.The wire junction uses plugged bolt to insure its easy operation . it s small in volume and light in weight easy to be installed
2采用对接式接头,连接时需将连接排插入接头,拧紧螺栓即可体积小,重量轻,方便安装。
6.Insert special bolt into the preset hole of c form parts , where the bolt will be fixed into the threaded hole of wedge , then screw the bolt on with a socket spanner until the first nut drops
将专用螺栓插入c形无件预留孔与楔块的螺纹孔相连,用套筒扳手拧紧螺栓直到第一个螺帽自行断落。
Similar Words:
"拧紧管接头" Chinese translation, "拧紧铰接卡钳" Chinese translation, "拧紧力矩" Chinese translation, "拧紧螺钉的" Chinese translation, "拧紧螺帽" Chinese translation, "拧紧螺丝" Chinese translation, "拧紧螺丝, 增加压力" Chinese translation, "拧紧螺旋盖" Chinese translation, "拧紧瓶盖" Chinese translation, "拧紧头" Chinese translation