| 1. | Nuts with spherical bearing surface
球形支承面螺母.直径到mm |
| 2. | Bedding of face
支承面的刮配 |
| 3. | Fasteners - preloading test for the detection of hydrogen embrittlement - parallel bearing surface method
紧固件.氢脆检测用预载荷试验.平行支承面法 |
| 4. | It is considered that this phenomenon is caused by difference of saddle surface speed between two pulleys
( 2 )环拉力在带的各边不同，这种现象由于两带轮间支承面速度不同造成的。 |
| 5. | Mechanical properties of fasteners - preloading test for the detection of hydrogen embrittlement - parallel bearing surface method
紧固件机械性能检查氢脆用预载荷试验平行支承面法 |
| 6. | Fasteners - preloading test for the detection of hydrogen embrittlement - parallel bearing surface method iso 15330 : 1999 ; german version en iso 15330 : 1999
紧固件.检测氢脆用预荷载试验.平行支承面法 |
| 7. | Mechanical transmissions . concentric assemblies on cylindrical carried with intermediate bush with conical external surface . calculation
固定环连接。在带有锥形外表面的中间套简的园柱支承面上。计算。 |
| 8. | Railway transport equipment . weight - saving equipment . pipework . removable pipe and nose couplings with toric bearing surface sleeves and tail ends
铁路运输设备.减重设备.管道系统.带复曲支承面套筒和尾端的可拆卸管和前端联结器 |
| 9. | Railway transport equipment . weight - saving equipment . pipework . 3 - piece removable pipe and nose couplings with toric bearing surface sleeves and tail ends
铁路运输设备.减重设备.管道系统.带复曲支承面套筒和尾端的三件组合式可拆卸管和前端联结器 |
| 10. | Top - directly as a basis and foundation of the bearing surface as the top - embedded steel bearings or bearing surface , the supporting surface , the anchor bolt ( anchor ) position should be consistent with the allowable deviation of norms
基础顶面直接作为柱的支承面和基础顶面预埋钢板或支座作为柱支承面时，其支承面、地脚螺栓（锚栓）位置的允许偏差应符合规范的规定。 |
