Chinese translation for "无水硫酸钠"

amhydrous sodium sulfate
anhydrous sodium sulfate
anhydrous sodium sulphate
sodium sulphate anhydraus
sodium sulphate anhydrous 99pct

Related Translations:

硫酸钠:  sodium sulfate

过硫酸钠:  sodium persulfate

乙硫酸钠:  sodium ethyl sulfate

烷基硫酸钠:  alkyl sodium sulfatessodium alkyl sulfate

硫化硫酸钠:  hypo

干燥硫酸钠:  dried sodium sulfatenatrium sulfuricum siccum

结晶硫酸钠:  sodium sulfate crystal

硫酸钠法:  sodium sulphate method

焦硫酸钠:  sodium pyrosulfate

连二硫酸钠:  sodium hydrosulfitesodium hydrosulphitesodium hyposulfate

Example Sentences:

	1.	Photographic grade sodium sulfate , anhydrous , na2so4 摄影级无水硫酸钠, na2so4
	2.	Chemical reagent - sodium sulfate , anhydrous 化学试剂无水硫酸钠
	3.	Anhydrous sodium sulfate for industrial use 工业无水硫酸钠
	4.	The optimum conditions for air electrode preparation were shown as follow : 20 % ptfe and 20 % mno2 in active layer , thickness of active layer 0 . 15 - 0 . 25mm and the ratio of active carbon to ethine black 4 : 1 ; 60 % ptfe in the gas diffusion and waterproof layer , employing na2so4 as pore - making agents , thickness 0 . 35 - 0 . 45mm , colding forming and layer sequence catlytic layer / gas diffusion and waterproof layer / current collector layout ; employing 40 meshed nickel screen as current collector and thermal treatment temperature over 200 确定了制备空气电极的优化工艺条件，催化层中ptfe含量约20 ， mno _ 2的最佳含量约为20 ，催化层中活性炭和乙炔黑的比例为4 ： 1 (质量比) ，厚度在0 . 15 - 0 . 25mm之间。防水透气层中ptfe的含量约为60 ，以无水硫酸钠作为造孔剂，厚度一般为0 . 35 - 0 . 45mm 。电极各层采用催化层/防水透气层/集流体的排布方式，冷压成型，热处理对空气电极的性能影响较大，热处理温度不低于200 。

Similar Words：

"无水硫酸钙" Chinese translation, "无水硫酸铝" Chinese translation, "无水硫酸铝钾" Chinese translation, "无水硫酸镁" Chinese translation, "无水硫酸锰" Chinese translation, "无水硫酸镍" Chinese translation, "无水硫酸铜" Chinese translation, "无水硫酸锌" Chinese translation, "无水硫酸盐" Chinese translation, "无水硫酸钴" Chinese translation