| 1. | This last advance permitted a very close approach to the limiting temperature of absolute zero .
最后的这步使温度能非常接近极限温度，即绝对零度。 |
| 2. | In agreement with this concept is the additional experimental result that decreasing the mean hydrogen injection velocity increases the stability limit temperature .
这一概念是与补充试验的结果相符的，即降低氢的平均喷射速度使稳定性极限温度增加。 |
| 3. | In extreme temperatures , the inflation rate will decrease a little bit
在极限温度中，充气速度会有一点降低。 |
| 4. | Housing limit temperature
外壳极限温度 |
| 5. | 05 . 02 test method for reaction threshold temperature of liquid and solid materials
液体和固体材料反应的极限温度的试验方法 |
| 6. | Plastics . thin sheets . determination of pliability limit temperature . looped test piece impact test
塑料制品.薄板.柔韧性极限温度测定 |
| 7. | Explosives for civil uses - high explosives - part 7 : determination of safety and reliability at extreme temperatures
民用爆炸物.烈性炸药.第7部分:极限温度下安全性和可靠性的测定 |
| 8. | Explosives for civil uses - high explosives - part 7 : determination of safety and reliability at extreme temperatures ; german version en 13631 - 7 : 2003
民用爆炸物.烈性炸药.第6部分:测定在极限温度下的安 |
| 9. | Aluminum and tin plated copper cups are available for calibrations not exceeding 221 f ( 105 c ) and temperature overrides not exceeding 250 f ( 121 c )
镀铝和镀锡铜杯适用于不高于华氏221度(摄氏105度)的标定温度内,极限温度不能超过华氏221度(摄氏105度) |
| 10. | The residue contact pressure will be decreased after temperature cycle , the higher the working temperature , the lower the residue contact pressure , which has been proved by experiment
研究表明，当复合管处于热加载状态时，复合管存在着极限工作温度；经过极限温度循环后，残余接触压力将减小，且极限温度越高，残余接触压力值越小；通过实验得到了验证。 |
