| 1. | This oxide coating may peel off under stress and break the stack bond .
该氧化层受压可能会剥落，并破坏铁芯的联结。 |
| 2. | The process of anodizing involves the deposition of further oxide on the surface .
阳极电镀的工序就是在表面进一步附着氧化层。 |
| 3. | They should remove the field plate and oxide and deposit a thin aluminum film over this region .
他们应当去掉场极板和氧化层，并在整个区域淀积一层薄的铝薄膜。 |
| 4. | Feioj content in the layer increases with the fe wt % in plating
随着镀层中铁含量的增加，氧化层中fe _ 2o _ 3逐渐增多。 |
| 5. | Formation mechanism of cracks in surface oxidating layer of mosi2 heating material
2电热材料表面氧化层裂纹的形成机制 |
| 6. | The coating can be white zine , color zine , nickel , phosphate processing or resin
磁体表面防氧化层可采用镀白锌、五彩锌、镀镍、磷化、或环氧树脂喷涂。 |
| 7. | Anodizing of aluminium and its alloys . general specifications for anodic oxide coatings on aluminium
铝及铝合金的阳极氧化.铝的阳极氧化层的通用规范 |
| 8. | A new physical model of tddb of ultra - thin gate oxides is presented on the bases of above analysis
为超薄栅氧化层的经时击穿建立了一个新的物理模型。 |
| 9. | A new hot - carrier - induced tddb model of ultra - thin gate oxide is reported in this dissertation
本文提出了一个全新的热载流子增强的超薄栅氧化层经时击穿模型。 |
| 10. | Blow out lines to remove all loose scale and other foreign matter that can damage valve seat
往外吹气，清除管道内所有可能损坏阀门阀座的疏松氧化层和其它外来物质。 |
