Chinese translation for "水雾化"
|
- atomized water spray
water atomization
Related Translations:
水雾系统: water spray projecter system 水雾喷射器: water spray projector 水雾灭火器: water spray fire extinguisher 细水雾: fire extinguisherwater mist 水雾保护: water spray protection
- Example Sentences:
| 1. | Water atomized pure iron powder and alloyed steel powder for powder metallurgy
粉末冶金用水雾化纯铁粉合金钢粉 | | 2. | The surface reaction of water atomized 304l austenitic stainless steel powder during sintering has been studied
摘要研究了水雾化奥氏体不锈钢粉末在致密时的表面化学反应。 | | 3. | Water atomization is a technique that can commercially and high - efficiently manufacture iron & steel powders . the key in their production technique is the high - pressure water atomization and the green powder reduction at an elevated temperature
水雾化制粉是一种适用于规模化、高效率生产高性能钢铁粉末的技术，其生产技术的核心是高压水雾化技术和原生粉末高温还原技术。 | | 4. | External firm is rornd , the surface is shine . it is atomized and shaped with stainless steel water . extensively applied in raising and cleaning up of the surface of nonferrous alloy and stainless products . after treatment , the surface of workpiece is glabrous , rustless and owns metallic luster
由不锈钢水雾化成形的圆球状颗粒，表明光亮，用于有色金属及不锈钢制品的表面清理，强化及起毛处理，处理后的工件表面光洁、无绣、凸现出金属光泽。 | | 5. | The feasibility of copper matrix reinforced by cr2o3 particles was discussed from the aspect of the demand of composite on reinforcer , interface and its formation . crcu alloy powders prepared by water atomization were turned into cr2o3 / cu compound powders , which were made into composites
本文从复合材料对颗粒增强相的要求、复合材料的界面以及复合材料的成型等角度分析了cr _ 2o _ 3颗粒作为弥散强化相增强铜基体的可行性，采用水雾化法制备crcu合金粉末，并通过预氧化的方法得到cr _ 2o _ 3 cu复合粉末，运用粉末冶金法制备cr _ 2o _ 3 cu复合材料。 | | 6. | The conclusions are as follows : ( 1 ) high - pressure water - atomization can be used to produce a pre - alloyed steel powder with high apparent density , high green strength , size - stability after sintering and low hydrogen - loss content ; ( 2 ) the higher smelting temperature and / or water pressure , the finer particle size of steel powders ; ( 3 ) when the atomization angle holds in a reasonable value ' s range the obtained powder will have a better particle size distribution ; ( 4 ) an optimum atomization technological parameters : liquid steel flux , water pressure and water prick angle was obtained ( 5 ) reduction variables ( temperature , holding time , material - bed ' s thickness and reducing gas flux ) have a significant effect on the particle agglomeration and properties of final powder was given ( 6 ) different alloying methods were developed to modify properties of ferrous powder materials and hence to broaden its applications in ferrous powder metallurgy industry
本文系统研究了水雾化预合金钢粉生产工艺及合金化方法对铁基粉末冶金材料性能影响，详细研究了冶炼、雾化、还原工艺参数对预合金钢粉化学成份和物理性能影响，并得出如下结论： ( 1 )采用高压水雾化技术可用于生产高密度、高强度、尺寸稳定性的低氢损含量的水雾化预合金钢粉。 ( 2 )冶炼温度越高，高压水压力越大，所得生粉颗粒粒度越细。 ( 3 )水锥角调整在一个适当角度范围内可获得粒度组成较好的生粉。 |
- Similar Words：
- "水雾" Chinese translation, "水雾 由喷嘴在高压下喷出的分散的很细的水" Chinese translation, "水雾保护" Chinese translation, "水雾防火系统标准" Chinese translation, "水雾护体" Chinese translation, "水雾化器" Chinese translation, "水雾冷却" Chinese translation, "水雾灭火器" Chinese translation, "水雾灭火系统" Chinese translation, "水雾灭火系统喷射试验" Chinese translation
|
|
|
