| 1. | Circular disk was rotating about an axis tilted from the normal through the center .
圆盘绕一个通过中心与法线方向倾斜的轴转动。 |
| 2. | Flip normals - change the normal directions of the selected faces
翻转法线-改变选择面的法线方向。 |
| 3. | The clamps should be stable , the clamping force should be in normal direction to the support surface
5夹紧器要稳定可靠，夹紧方向按定位面法线方向。 |
| 4. | Fixing backface culling generally needs you to select all faces that are incorrectly culled , and to flip their normal
要修复此问题，通常需要反转所有没有正确应用剔除的面的法线方向。 |
| 5. | These emission peaks are located in the directions of the specular reflection of laser , the target normal and the back - reflection of laser respectively
这些超热电子发射峰分别沿着激光反射方向、靶法线方向和激光背反射方向。 |
| 6. | Note 2 : there is a specific case where coplanar / parallel surfaces ( that are very close to each other ) are acceptable , and that ' s when they have opposite orientations
注意2 ：只有在共面表面或近距离平行表面的法线方向不同时，才可以在模型中使用。 |
| 7. | Entity knowledge base provides computing models information , such as , life or not , fly or not and so on . besides , there are some geometry properties such as normal line , orientation and so on
实体知识库提供实体的基本属性信息,比如是否具有生命,是否会飞的属性,另外还有一些几何属性,法线方向、朝向等。 |
| 8. | A method of 3 - d depth measurement following normal direction is proposed in this thesis . with the use of this method to get thickness information of facial parenchyma , the precision is increased compared with former methods
本文提出了一种沿法线方向的三维深度测量方法，将其应用于面部软组织厚度信息的测量，与原来的方法相比提高了测量精度。 |
| 9. | Under the all different structures " combination , the water surface had large bias and turn - around in the torturous path , and in the middle of the path along the longitude , there had the regularity that sink bank surface was higher than the convex bank one
在所有结构组合条件下，弯道水面都有较大偏斜和扭曲，并且在弯道中部主法线方向上，基本为凹岸水面高凸岸水面低的规律。 |
| 10. | The double sided leaf shader is a surface shader that produces the & quot; double sided & quot; effect by switching between two separate material nodes depending on whether or not the surface normal of the point being shaded is facing the camera
双面叶材质是一个表面材质，能通过切换两个分别的材质节点来产生双面材质效果，它的材质是依赖在表面上的面对摄像机时的表面法线方向与否来区分被着色点。 |
