Chinese translation for "浇道"
|
- feeder
geat
pouring channel
pouring gate
runner gate
running channel
sprue cold material trap
Related Translations:
- Example Sentences:
| 1. | Tools for moulding - sprue bushes - dimensions iso 10072 : 2004
模铸工具.浇道套.尺寸 | | 2. | Study of u shaped girder with pre - cast main beam and cast in - situ slab
预制主梁现浇道床板的槽形梁研究 | | 3. | Sprue bushes for moulds
铸模用浇道衬套 | | 4. | Runner stripper plate
浇道脱料板 | | 5. | There are many causes , such as fast mold opening , high mold temperature , uneven mold temperature and imbalance of runners
成品变形之原因相当多，如出模太快模温过高模温不均及浇道系统不对称等。 | | 6. | The cross - section area of the internal sprue , the fill speed , the fill time and injection pressure are important die casting technology parameters
摘要内浇道截面积、充填速度、充填时间和压射比压都是重要的压铸工艺参数。 | | 7. | The max . temperature , cold runner result shows the max . temperature across the cold runner temperature profile calculated at the end of cooling time
冷却结束时，冷浇道断面上最高温度分布情况（与顶出温度相比，判断此时是否顶出） 。 | | 8. | Feeding , ingate design , air discharge , position of signal wire were analysed and discussed , aiming at the several questions in production of low pressure casting
摘要根据低压铸造工艺的特点和生产实践，从补缩、内浇道设计、排气、信号线安放位置等方面进行了分析和探讨。 | | 9. | Based on the new equilibrium solidification theory , the dispersed gate with flat 、 thin and wide rise neck , coupled with cold iron and warming riser , was adopted in the new gating system
经分析主要原因是原工艺热冒口的冒口颈（内浇道）偏小，且开设的位置不合理，造成内浇道根部存在疏松和晶粒粗大铸造缺陷。 | | 10. | The cross section area of the internal sprue of the die casting dies designed should be of proper value , and matches perfectly the fill speed , the fill time and injection pressure in case that the die casting dies fail in the design
设计压铸模时应当确定恰当的内浇道截面积，并使之与充填速度、充填时间和压射比压保持较好的匹配，以防止压铸模设计的失败。 |
- Similar Words：
- "浇不足" Chinese translation, "浇不足；滞流；残锭" Chinese translation, "浇槽" Chinese translation, "浇池" Chinese translation, "浇出嘴斗、桶、埚、炉" Chinese translation, "浇道、进胶口" Chinese translation, "浇道棒" Chinese translation, "浇道比" Chinese translation, "浇道废料" Chinese translation, "浇道浇口" Chinese translation
|
|
|
