| 1. | Measurement at full range for all ranges for 3 test frequencies
三个测试频率所有量程的全量程测量。 |
| 2. | An optional 20 khz test frequency can be added to those five frequencies
还能增加可选的20khz测试频率。 |
| 3. | Is there a board ionic contamination being tested ? if so , what is the test frequency
是否有做离子污染测试?测试频率怎样 |
| 4. | Measurement status : parameter , voltage , frequency , circuit parallel series
测试状态:测试参数,测试电压,测试频率,测试回路串联并联 |
| 5. | Is plated copper being test in the environmental test chamber ? if so , what is the test frequency
对于镀通孔，测试是否在（可设定条件的）环境舱内进行？如果是，测试频率是多少？ |
| 6. | Is there a board ionic contamination being tested ? if so , what is the test frequency
你们是否能做阻抗测试？测试能力和测试频率如何？请说明如何控制阻抗，如何保存（阻抗）测试条？ |
| 7. | The maximum permissible error when the working frequency of resistor is equal to or lower than the measurement frequency
电阻箱的工作频率等于或低于测试频率上限时的最大允许误差。 |
| 8. | Do you perform the impedance test and your capability & frequency ? please describe how to control impedance and retain the coupon sample
你们是否能做阻抗测试？测试能力和测试频率如何？请说明如何控制阻抗，如何保存（阻抗）测试条？ |
| 9. | The basic calibration for a single decade ivd will include measurement of voltage ratio for all output settings of the ivd at one test frequency
一个单盘感应分压器的基本校正工作包括按一测试频率，测量该电感分压器所有输出定位的电压比。 |
| 10. | A methodology was put forward for damage location , and damage simulating as well as numerical calculation of modal analysis was carried out on a truss plane bridge by stiffness discount
摘要推导了基于测试频率平方变化比的损伤定位方法，利用有限元方法对一管道结构以刚度折减法进行了损伤模拟和模态分析数值计算。 |
