Mobile
Log In Sign Up
Home > english-chinese > "浸渍工艺" in Chinese

Chinese translation for "浸渍工艺"

dipping processes
impregnation processing
impregnation technology


Related Translations:
浸渍模:  dipping former
浸渍罐:  impregnating vesselsteeper
浸渍线圈:  dipping coildoping coilimpregnate coilsimpregnated coil
浸渍软管:  saturated sleeving
浸渍程度:  steeping degree
亚麻浸渍:  flax retting
浸渍液:  dippingforming sizeimmersion liquidimpregnation liquidmaceration extractpicklesteeping fluid
浸渍机:  dipperdipping machineimpregnating machineimpregnation machineimpregnatoroiling machineslashersteeping machine
浸渍层:  illuvial horizonilluvium
浸渍方法:  dipping method
Example Sentences:
1.Rift resin infusion under flexible tooling
挠性上模具树脂浸渍工艺
2.To simplity and improve the tedious technological process , a new process is proposed to integrate well the heating and drying with impregnation in a vacuum tank
一体式的真空干燥及真空压力浸渍工艺将上述两道工艺合二为一,在同一台真空罐内进行一体式的加热、真空干燥和真空压力浸渍。
3.The microstructures of precursor fibers , fibrous cloths , the composition of zirconia solution , the technological parameters of impregnation , and the modes of drying and firing were investigated
对前躯体纤维、纤维布结构、锆液配方、浸渍工艺参数、干燥及烧成方式和制度进行了深入研究。
4.The hot - melt impregnation process of large tow carbon fiber ( 60k ) prepreg to prepare fishing rods is briefly introduced in this paper ; in addition , several typical factors which affect the quality of the prepreg are also discussed in detail here
摘要本文简要介绍了钓鱼竿用大丝束( 60k )碳纤维预浸料熔胶膜法浸渍工艺,并著重就影响预浸料质量的几个主要因素进行了讨论。
5.The parameters of impregnation are as follows : ph is about 3 , the range of temperature is from 20 to 45 , and the time is about 2 to 6 hours . after the necessary treatments , zirconia cloths had the optimal strength when the diameters of zirconia fibers were controlled in 4um to 7um , and the sizes of zirconia grains were in 50nm to 100nm . the affec - ting factors were discussed and the liner regression analysis of the cloths was made , from w hich they show that the diameters and grain sizes have the significant influences on zirconia cloths . the obtained zirconia cloths have been accepted for use in nickel - hydrogen batteries by practical use
研究结果表明:粘胶类纤维布最适合制备氧化锆纤维布的前躯体;锆液浓度以饱和溶液为宜;浸渍工艺参数为ph值3左右,温度20 45 ,时间2 6小时;多余锆盐的去除、浸锆液后纤维布的整平处理及平烧施应力烧成有利于氧化锆纤维布的柔软及平整; 200 600烧成温度段应缓慢烧成,控制氧化锆纤维直径在4 7 m ,氧化锆晶粒尺寸50 100nm时氧化锆纤维布的强度最好。
6.This paper introduces the property requirements on insulating varnish and some technical indicators of import varnishes used in electronic transformer , discusses the effects of baking temperature , baking time , dry capability , impregnation process of varnish on the noise , rustiness box craze , insulating tape bond failure which occurred in electronic transformer
摘要介绍了电子变压器用绝缘浸渍漆的性能要求,介绍了一些进口绝缘浸渍漆的性能指标,分析讨论了漆的烘烤温度、时间、干燥性、浸渍工艺对电子变压器的噪声、生锈、外壳爆裂、绝缘胶带脱开的影响,讨论了绝缘漆在应用中的环保问题。
7.Spcc has a strong engineer team products with logical design - ing and advanced craft , scientific managerial approach and complete testing system . the key manufacturing process is finished in depur - ation workshop with constant temperature and humidity . the vacuum and temperature of disposal of vacuum impregnating is controlled by computer completely
企业技术力量雄厚,产品设计合理,工艺先进,管理科学,测试手段全完善关键工序的生产过程在恒温恒湿的超洁净室内进行真空浸渍工艺的真空度及温度由计算机全自动控制。
8.The strength and wear resistance of diamond drill bits for petroleum exploitation will be increased considerably when cast tungsten carbide is applied and adheres to the substrate firmly with cast tungsten carbide of 80 - 200mesh as the skelton and copper alloy as the soldering material in a process of non - pressure immersion
石油钻探行业用的金刚石钻头,用粒度为80 ? 200目的铸造碳化钨粉作骨架,采用无压浸渍工艺,以铜合金作钎焊料,将铸造碳化钨与基体牢固结合,强度、耐磨性大大提高。
Similar Words:
"浸渍腐蚀" Chinese translation, "浸渍附胶量" Chinese translation, "浸渍缸温度" Chinese translation, "浸渍高温计" Chinese translation, "浸渍工" Chinese translation, "浸渍骨架" Chinese translation, "浸渍挂架" Chinese translation, "浸渍管" Chinese translation, "浸渍罐" Chinese translation, "浸渍辊" Chinese translation