Chinese translation for "热套"
|
- heating jacket
shrink on shrink-on shrinkage fit thermal shroud
- Example Sentences:
| 1. | The initial inner diameter of the outer cylinder was 59 mm, giving a shrinkage allowance of 1. 5% . 外圆筒的初始内径为59毫米,热套裕度为15。 | | 2. | 3 . dimension and configurations thermal jacket type 1热套式热电偶 | | 3. | The initial inner diameter of the outer cylinder was 59 mm , giving a shrinkage allowance of 1 . 5 % 外圆筒的初始内径为59毫米,热套裕度为1 5 。 | | 4. | Railway applications - brake discs for railway rolling stock - brake discs pressed or shrunk onto the axle or drive shaft , dimensions and quality requirements 铁路设施.铁路车辆的制动盘.加压或热套到轴或驱动轴的制动盘的尺寸和质量要求 | | 5. | Railway applications - brake discs for railway rolling stock - part 1 : brake discs pressed or shrunk onto the axle or drive shaft , dimensions and quality requirements ; german version en 14535 - 1 : 2005 铁路设施.铁路车辆的制动盘.第3部分:加压或热套到轴或 | | 6. | In view of the problems in the design of the large andmedium - sized indoor substations built by guangzhou power bureau in recent years , points for attention in the design of indoor substations are expounded in terms of ventilation , cable channel , reservation of hangers and space for transportation and installation , ground wire , lighting for the whole substation , etc 本文介绍了在无大型压力设备情况下实施大型电机转子铁心热套轴时出现的现象,分析和研究出其产生的机理,提出了几个切实可行的处理方法和应注意的问题 |
- Similar Words:
- "热烫工段" Chinese translation, "热烫机" Chinese translation, "热烫联合机" Chinese translation, "热烫伤目" Chinese translation, "热烫液" Chinese translation, "热套泵" Chinese translation, "热套表面压力" Chinese translation, "热套管" Chinese translation, "热套管接头" Chinese translation, "热套焊接曲轴" Chinese translation
|
|
|