Mobile
Log In Sign Up
Home > english-chinese > "热裂纹" in Chinese

Chinese translation for "热裂纹"

fire check
heat checking
heat cracking
heating crack
hot cracking
hot fi ure
thermal crack


Related Translations:
时效裂纹:  ageing crackageing induced crackaging crack
网状裂纹:  alligatoringpattern crackingresillage
液化裂纹:  liquation crack
裂纹试验:  controlled thermal severity cracking testcrack testiiw cracking test
尖裂纹:  sharp crack
碰撞裂纹:  bruise check
宏观裂纹:  macro crackmacrocrackmacroscopic cracking
裂纹敏感性:  crack se itivitycrack sensitivitycrack susceptibilitycrack-sensitivitycracking sensibilitycracking susceptibility
臭氧裂纹:  ozone cracking
Example Sentences:
1.Simulation and analysis of the method of reducing thermal crack at the edge of piston with toroidal combustion chamber
收口型燃烧室边缘热裂纹缓解措施的研究
2.Abstract : in the paper , the hot crack for the forging die made by methodsof squeeze casting is analyzed , how to reduce the hot crack is also given out
文摘:从生产实际出发,分析了锻模液态模锻成形过程中热裂纹形成的主要原因,提出了降低锻模热裂纹的几点措施。
3.Destructive tests on welds in metallic materials - hot cracking tests for weldments - arc welding processes - part 3 : externally loaded test iso tr 17641 - 3 : 2004 ; german translation of cen iso tr 17641 - 3 : 2004
金属材料焊接的有损检验.焊件的热裂纹试验.弧焊过程
4.On the basis of the experiment , the reason that high strength 7a52 aluminum alloy produced the familiar defects such as hot cracking , porosity , slag patch , etc . in the welding was analyzed , and the preventive measures of every defect were adopted
摘要在实验的基础上分析了高强7a52铝合金焊接时出现的常见焊接缺陷:热裂纹、气孔、夹渣等产生的原因,并对每种缺陷提出了预防措施。
5.It has been pointed out that for the application of cryogenic nitrogen gas jet in high speed milling of titanium alloy , unless the chipping and fracture caused by thermal cracks take place , the reduced temperature of cryogenic nitrogen gas will prolong the tool life
指出在低温氮气射流条件下高速铣削钛合金时,只要热裂纹的形成与扩展未引起刀具的崩刃及刀面的剥落,进一步降低低温氮气的温度将提高刀具的使用寿命。
6.Based on the mechanism of hot cracking formation of castings , the cracking defects of furnace door frame castings was analyzed , and found that the main reasons causing cracking are as follows : construction of the casting was not reasonable , gating system was not proper , and pouring temperature was too high
摘要根据铸件产生热裂纹的机理,对炉门框裂纹缺陷进行分析,找到了裂纹产生的主要原因是铸件结构和浇注系统不合理,以及浇注温度过高。
Similar Words:
"热裂气" Chinese translation, "热裂容易度" Chinese translation, "热裂试验" Chinese translation, "热裂碳黑" Chinese translation, "热裂炭黑" Chinese translation, "热裂纹试验" Chinese translation, "热裂隙" Chinese translation, "热裂形成" Chinese translation, "热裂作用" Chinese translation, "热烈" Chinese translation