| 1. | Kangning company lcd glass board factory
康宁公司lcd玻璃基板中国工厂 |
| 2. | Glass substrate cutting , drilling
玻璃基板切割钻孔 |
| 3. | Ceramic substrate , cutting , drilling for hybrid ic , glass substrate laser processing
电子用陶瓷基板玻璃基板雷射加工。 |
| 4. | Epoxy glass substrate
环氧玻璃基板 |
| 5. | Ito glass substrate
导电膜玻璃基板 |
| 6. | This process is accomplished by evaporating the constituent materials and letting them condense on the substrate
先从玻璃基板开始，将不同的材料一层层堆积在上面。 |
| 7. | The molecule of liquid crystal is anchored on the surface of the glass plates , and exists a certain angle ( pretilt angle ) with the glass plates
液晶分子弱锚泊在玻璃基板表面，并且与玻璃基板表面成一定的角度(预倾角) 。 |
| 8. | The director of liquid crystal will generate an evident transformation due to the flexoelectric effect induced by an external invariant voltage normal to the plane of the glass plates
沿垂直于玻璃基板表面的方向加一恒定的电压，由于挠曲电效应的影响，液晶指向矢将会发生明显的变化。 |
| 9. | In the early stage of experiment , an in - material thin film manganin gauge was studied . this in situ gauge was manufactured by single - step thin film processing , namely , manganin piezoresistance element was prepared on inorganic substrates such as ceramic , microcrystalline glass , etc by sputtering
在实验的初期，本文还研究了“在位式”的锰铜薄膜传感器，即首先在陶瓷或微晶玻璃基板上沉积锰铜敏感元件，然后用粘贴ptfe薄膜的方法完成传感器的封装。 |
| 10. | A detailed analysis of the electrical properties of ato thin films was carried out in order to investigate the sb / sn atomic ratio and substrate temperature ' s influence on the ato thin film . a convictive explanation brought forward to illustrate the changing of the electrical ； properties of the ato thin film in different conditions
在温度较低时( < 500 ) ，薄膜的方块电阻随成膜温度的升高而降低；当基板温度继续升高，薄膜的方块电阻随基板温度的升高而增大，这主要是因为玻璃基板中k ~ + 、 na ~ +离子向薄膜中的扩散。 |
