Chinese translation for "理论廓线"
|
- pitch curve
Related Translations:
齿廓: [机械工程] flank profile; tooth profile
- Example Sentences:
| 1. | The theoretic contour line and actual contour line of compensatory cam was ascertained with " reversal method "
利用“反转法” ，确定了补偿凸轮的理论廓线及实际廓线。 | | 2. | Through calculation of a living example and its result analysis verified that while the vibration amplitude is comparatively small and the sine curve is being adopted , the theoretical contour of cam possesses rather good form closure property and is suitable to be applied for high - speed cam
通过实例计算和结果分析，表明该凸轮理论廓线采用正弦曲线，在振幅较小时，有较好的形封闭性，适合用于高速凸轮。 | | 3. | In the paper , based on the method of low pair replacing with high pair , the problem of cam design was transferred to that of linkage design . by means of rotary unit vectors , the equations of displacement , velocity and acceleration of the replacement mechanisms were developed . and then , the virtual linkage ' s length and direction were deduced
论文基于高副低代原理，将平面凸轮机构设计与再现函数的平面连杆机构设计统一为同一种方法，运用圆向量函数建立代换机构的位移、速度、加速度矢量方程式，求取虚拟连杆杆长和方向，由此展开凸轮理论廓线、实际廓线、曲率半径和压力角的求解，并得出用圆形刀具加工凸轮时刀具中心的轨迹方程。 | | 4. | This paper provides the general equations of the theoretical contour line and the actual contour line of roller translation follower and roller oscillating follower disc cam in the polar coordinates system and the rectangular coordinates system , respectively . the equations are not only fit for the different layouts of the relative position of follower and cam , but also fit for the different types of cam contour
分别给出了滚子直动从动件和滚子摆动从动件盘形凸轮的理论廓线及实际廓线在极坐标系与直角坐标系下的通用方程,它们对于从动件与凸轮相对位置的不同布局方式及凸轮轮廓的不同类型均适用 |
- Similar Words：
- "理论孔隙度" Chinese translation, "理论跨度" Chinese translation, "理论框架" Chinese translation, "理论矿物酸度" Chinese translation, "理论扩散系数" Chinese translation, "理论肋骨线" Chinese translation, "理论肋骨线周长" Chinese translation, "理论力学" Chinese translation, "理论联系实际" Chinese translation, "理论联系实际原则" Chinese translation
|
|
|
