Chinese translation for "电蚀"

[ diànshí ]
electric corrosion
electric erosion
electrolytic corrosion
galvanic corrosion

Related Translations:

蚀:  Ⅰ动词1.(损失; 亏耗) lose 短语和例子亏蚀 lose (money) in business; 听说他做生意蚀了本。 i hear that he is losing by his business.2.(腐蚀) erode; corrode 短语和例子风雨侵蚀 erosion by wind and rain; 锈能蚀铁。 rust corrodes iron.

风磨蚀:  wind abrasion

损蚀:  deterioration

蚀黄铜矿:  barnhardtite

蚀群体:  arboroid colony

汽蚀:  cavitationpit through

渗蚀:  eluviation

喷蚀:  sespray etching

碱蚀:  alkaline degreasing

酸蚀:  acid corrosionacid etchingpicklepickling

Example Sentences:

	1.	Simulation test on electrical erosion of gears 齿轮电蚀模拟试验
	2.	Test sieves . technical requirements and testing . part 3 : test sieves of electroformed sheets 试验筛.技术要求和试验.第3部分:电蚀孔板的试验筛
	3.	Uniform tunnel distribution is related to certain a13 + concentration avoiding large pits at the beginning stage of etching 溶液中al ~ ( 3 + )避免了电蚀初期形成大孔，使隧道孔分布均匀。
	4.	3 . new types of geosynthetics ekg are studied including the conductive materials which have been considered for ekg , and the conductive methods , the conductive patterns , the electric corrosion and so on ( 3 )论文主要探讨了新型加筋材料电动土工合成材料ekg研制过程中所遇到的材料形式、导电方式、导电性能以及电蚀等问题的解决方法。
	5.	It has been confirmed practically that the diamond highness above base material can be adjusted with the range when the generator is put into use , and the result shows that the current density drop sharply with the increase of machining gap 结果表明，间隙值的扩大伴随电流密度的显著下降，检测电解电流控制脉冲能量的方法对实现电蚀层厚度基本可控是可行的，可让金刚石突出一定高度。
	6.	An energy controllable ecm pulse generator which machining gap appearance changes with the detected eum current variable is developed , to make the electrolysis thickness of ecm and machining gap width of the diamond controllable 用检测电流的方法，设计和研制随间隙状态变化能量可控的脉冲电解电源，用于金刚石节块电解修刃，以实现电解电蚀层厚度的基本可控，从而可实际控制金刚石的出刃高度。
	7.	This paper provides a new method which using binocular 3d vision technology extract the depth information of the electro - eroded contracts of electrical appararus , rebuild the 3d image the paper provide the arithmetic of edge detection and matching applying to the image of the contact surface of electrical apparatus , rebuild 3d image for disperse data and achieve depth information 本文提出利用双目立体视觉技术对电蚀后的电器触头进行深度信息提取，重建立体图像。本文提出了适用于电器触头图象的边缘检测，立体匹配算法，并对得到的离散数据进行三维重建，得到了深度信息图。

Similar Words：

"电石渣废水" Chinese translation, "电石贮罐" Chinese translation, "电拾音器" Chinese translation, "电时分复用" Chinese translation, "电时计" Chinese translation, "电蚀；电腐蚀" Chinese translation, "电蚀；电偶腐蚀" Chinese translation, "电蚀除毛" Chinese translation, "电蚀到" Chinese translation, "电蚀加工" Chinese translation