| 1. | Induction - hardened ground and finished steel shafts
感应淬火研磨抛光的钢轴 |
| 2. | Seat face stellited , ground and lapped to a mirror finish
钨铬钴合金面阀座，经过研磨抛光达到镜面抛光度。 |
| 3. | It is easy and fast to install by any kind of fittings . weld - free is to save grinding and polishing
利用各个零件组合而成，装置方便快速，免现场焊接，研磨抛光。 |
| 4. | Range of application : it is used in hand - operated machine for crystallized glass panels in grinding and polishing
适用范围：适用于微晶板材手抛式生产线研磨抛光。 |
| 5. | A good degree of polishing can be obtained , increasing the time in the same process 20 to 45 minutes
可达到相当程度的抛光水准，而且研磨抛光时间短，只须要20 - 45分钟即完成。 |
| 6. | Seat face stellited , ground and lapped to a mirror finish . conical seat machined to 8 rms
阀座面为钨铬钴合金，经过研磨抛光达到镜面光洁度。锥形阀座经过机加工，精度达到8rms 。 |
| 7. | Wedge is ground and lapped to a mirror finish and tightly guided to prevent dragging and seat damage
楔板经过研磨抛光达到镜面光洁度，还经过紧密性引导来防止由于拖动造成阀座的损坏。 |
| 8. | It is suitable for manufacturing of vitrified and resin bonded tools , and for lapping polishing and sand blasting
适应于制造陶瓷树脂磨具以及研磨抛光喷砂用，也可用于制作高级耐火材料。 |
| 9. | It is suitable for manufacturing of vitrified and resinoid tools , and for lapping , polishing and blasting . it can be also used to make engineering ceramic and superior refractory products
适应于制造陶瓷书脂磨具以及研磨抛光喷砂用，也可用于制作工程陶瓷高级耐火材料。 |
| 10. | Flat disc . floating stem - disc engagement , hardfaced with 13 cr , stellite 6 , ss 316 or monel , ground and lapped with seat . disc in ss 316 hardfaced with stellite 6 also available
平面阀瓣。浮动的阀杆-阀瓣啮合， 13cr 、钨铬钴合金6 、不锈钢316或蒙乃尔表面硬化、研磨抛光的阀座。表面钨铬钴合金6硬化的316不锈钢阀瓣也可供用户选择。 |
