| 1. | Db can be mounted in any orientation
Db型硅碳棒可以在任何方向是安装。 |
| 2. | The element hot zone is a self bonded silicon carbide
这种硅碳棒的发热部是自发结合的碳化硅。 |
| 3. | Elements can be replaced while the furnace is at operating temperature
在温控范围内该种硅碳棒可以被替换。 |
| 4. | The y element should be mounted only vertically for the same reason
同样的原因， y型硅碳棒必须是垂直安装的。 |
| 5. | This u has two legs , for a total surface area of 75 square inches
型硅碳棒有两段，总辐射面积则为75平方英寸。 |
| 6. | Db can be replaced while the furnace is at operating temperature
当熔炉内温度在操作范围内时db型硅碳棒可以被替换。 |
| 7. | Ser elements can be replaced while the furnace is at operating temperature
在熔炉温控范围内， ser型硅碳棒可以被替换。 |
| 8. | When these elements are mounted horizontally the bridge should be supported
在安装这些硅碳棒时，需要用一个连桥支撑着。 |
| 9. | Example : at 2600 f the element could be loaded to 45 watts per square inch
例如，在2600 f时硅碳棒的负荷为45瓦/平方英寸。 |
| 10. | Elements may be connected in parallel , series , or any combination thereof
这些硅碳棒可以是并联的，串连的，或者是串并混联的。 |
