| 1. | Verification regulation of portable induction anemometer
轻便磁感风向风速表试行检定规程 |
| 2. | Application of elliptic integral calculus in computing magnetic induction intensity
椭圆积分在求磁感强度上的应用 |
| 3. | The effect of different thermal treatment methods on polycrystalline ni - mn - ga alloy
合金马氏体相变和磁感生应变的影响 |
| 4. | The experiments as follows are done : ( 1 ) space of magnetism sense organ and needle valve is measured
本课题进行了以下设计与试验: ( 1 )测定磁感喷油器的磁敏元件和挺杆之间的最佳间隙。 |
| 5. | Wind : most meteorological stations are equipped with combined vane and cup generator anemometers with dial indicator and or chart recorder for wind speed and direction measurement
风：大多数台站都设置风向标及磁感风杯风速表来量度风向和风速，并附有刻度盘或图表记录器。 |
| 6. | Bourdon springs , diaphragms , capsule springs and magnetic pistons are used as the mechanical pressure sensing element ; electronic pressure gauges and switches are based on thin - film technique , ceramic - or piezoresistive semiconductor sensors
机械压力传感器元件有波登弹簧，横膈膜，圆柱体弹簧和磁感活塞。电子压力仪表和开关则是基于薄膜技术，陶瓷或压阻半导体传感器。 |
| 7. | Because the magnetic field of the earth is inclined in most places ( it points not only north but also downward in the northern hemisphere and upward in the southern ) , a magnetotactic bacterium can follow a magnetic field line up or down to its desired destination
由于地球上大多数地区的磁场是倾斜的（在北半球，磁场不只是往北指，还向下指；在南半球则是向上指） ，磁感细菌可以根据磁场的上下方向，而到达它的目的地。 |
| 8. | The main contributions of the dissertation are as follows : on the basis of experimental results , the operational effects , such as the magnitude of magnetic field , the temperature and the rate of shear strain , on the shear stress of the mr fluid are shown and models of the quasi - bingham model and a nonlinear model for the shear stress of the mr fluid also are developed , in which the characteristic of " shear - thin " of the mr fluid is described
论文的主要贡献如下：通过测试磁流变液剪切应力与磁感强度、剪切应变速率、温度的变化规律，建立了能反映磁流变液剪切变稀现象的剪切应力与剪切应变速率的磁流变液模型。根据磁流变液模型，从理论上建立了能在较宽的电压内范围比较准确地预报磁流变阻尼器输出力的近似公式。 |
| 9. | The contents of the thesis are as follows : ( 1 ) all the contents : magnetism sense fuel injector is designed . needle valve lift signal , rotation speed signal and pressure signal are collected and processed . circuit is designed . programme is programmed . ( 2 ) contents studied : the item is completed
本课题的研究内容有: ( 1 )本课题所要研究的内容包括:磁感喷油器的设计;针阀升程信号、主轴转速信号、喷油压力信号的采集与处理;系统硬件电路的设计;软件编程等。 |
