Chinese translation for "空化特性"

cavitation performance

Example Sentences:

	1.	Experimental researches of characteristics of hydrodynamics pressure and cavitation on the front of aeration - baffle have been done so as to obtain the distributions of the fluctuating pressure and time - averaged pressure 通过对齿墩墩头的动水压强及空化特性的研究，得到了时均压强和脉动压强分布规律。
	2.	The researches including discharge capacity , pressare properties , cavitation characteristics at some key positions , hoisting load of the gate , configuration of energy dissipator at the exit dentated - sill , and downstream scouring were performed by hydraulic model tests 借助系列水工模型试验对水布垭放空洞的泄流能力、压力特性及关键部位的空化特性、闸门启闭力、出口鼻坎消能工体型及下游冲刷等进行了较深入的研究、分析。
	3.	The additional flow is formed by the device of dentoid baffle , and the application of the device of dentoid baffle cooperated with a stilling basin has been investigated by systematic model tests . based on the research results , the hydraulic problems such as the characteristics of hydrodynamic pressure and cavitation on the head of the denotid baffle , the properties of flow under the condition that the device of denotid baffle is used with a stilling basin , the hydraulic computation about a stilling basin , the estimation of energy dissipation and its various affection factors , the mechanism and effect of energy dissipation , and distributions of velocity and pressure and aerating concentration , etc , have been analyzed ; the method and step of hydraulic design of device of denotid baffle by which the additional flow is produced has also been proposed 文中利用齿墩设施实现附加射流，对齿墩设施与消力池联合应用进行了大量的和系统的模型试验，分析研究了中低佛劳德数条件下，齿墩墩头的动水压强及空化特性，齿墩设施与消力池联合应用时的流态特性，消力池的水力计算，消能量的估算及其各种影响因素，消能机理和效果，消力池内的流速、压强特性，掺气浓度分布等水力学问题，并提出了实现附加射流齿墩设施的水力设计方法和步骤。
	4.	The numerical simulation and experimental research made on the characteristics of the clearance cavitations in kaplan turbine are described herein ; in which the analysis mainly is concentrated on the characteristics of leakage - vortex caused by the flow of the clearance between blade tip and blade chamber , that occurs at the front - pressure side of the blade , and the intensity of the secondary - flow - vortex ; furthermore , the relationship in between the leakage - vortex , secondary flow vortex , cavitations and erosion are analyzed as well 摘要对轴流转桨式水轮机轮缘间隙流动及空化特性进行数值模拟和试验研究，重点分析轮缘间隙流动在正面头部泄漏流动所引起的泄漏涡带、二次流动的漩涡强度和空化特性，以及泄漏涡带旋转、二次流动的漩涡与空蚀和磨损之间的关系。

Similar Words：

"空化试验水筒" Chinese translation, "空化数" Chinese translation, "空化水流参数" Chinese translation, "空化水翼" Chinese translation, "空化损坏" Chinese translation, "空化特性曲线" Chinese translation, "空化体" Chinese translation, "空化图" Chinese translation, "空化图表" Chinese translation, "空化图形" Chinese translation