Chinese translation for "线光源"

line source

Related Translations:

光源:  light source; source; illuminant; illuminating source; luminous source; source of light; radiant

裂隙光源:  slit sources

其它光源:  other light sources

光源院:  kogenin

露天光源:  open-air spark

包围光源:  the ambient light source

独立光源:  arbitrary source

光源调制:  active light modulation

闪光光源:  stroboscopic light sources

面光源:  area sourcesurface light sourcesurface source

Example Sentences:

	1.	On straight light and reflect light of linear light source 关于线光源的直射光与反射光的研究
	2.	Design of linear light source composed of light - emitting diode array in large light - screen target 大靶面光幕靶中发光二极管阵列线光源的设计
	3.	Through the methods of reflection refraction and accumulation the light could be well - proportioned to be the best way of transmission from light - line to light face 通过对光的反射、折射和累加达到均匀的平面发光效果，用最快捷的办法实现线光源到面光源的转变。
	4.	By means of the rectangular d iaphragm and two orthogonal cylinder lens , the collimated laser is shaped , which is stretched and compressed respectively in two different directions , and the l ine source with ideal shape is achieved 并应用矩形光阑和两个相互垂直放置的柱面镜，对准直后的激光束进行整形，分别在不同的方向进行拉伸和压缩，得到了形状理想的线光源。
	5.	The conclusions are as follows : the ultrasonic intensity is proportion to the laser intensity ; the ultrasonic induced by a laser line source has much more advantages than by a laser point source , such as stronger energy , higher snr , more directivity and shape ; the intensity of cfpi ' s output signal is linear with ultrasonic vibration velocity , and is effected by incidence angle and scattered angle ; snr will increase by reducing cfpi ' s bandwidth , reducing incidence angle , increasing cavity ' s length and reflectivity 在分析点光源激励声表面波机理的基础上，求出了线光源激励的超声振动的位移表达式，发现线光源激励的近场区表面波具有波形好，信噪比高，指向性好，幅度强等特点。通过理论推导，得出共焦fabry - perot干涉仪的输出光强除了与样品表面的振动速度成正比，并与入射角和散射角有关；适当减小cfpi的带宽，增加腔长，增大镜面反射率，或者减小检测入射角都可以提高系统的信噪比。
	6.	Presented four methods of laser collimation , realized 3 of them with the software of zemax , and meted the requirement of the system design ; 3 . realized the laser beam expanding from point - laser to line - laser wide enough to cover the flange trackside ; 4 . after image grabbing and processing , picked up the profile of the train wheel 作者独立完成的工作包括： 1 、提出了曲面测量的光学系统的整体方案； 2 、提出了四种激光扩束的方案，用光学设计软件zemax完成了其中三种的设计；经过像差分析和追迹，达到了准直扩束的要求； 3 、点光源到线光源的单方向扩展，达到了覆盖轮缘踏面的要求； 4 、通过实验采集图像和图像处理，提取出被测轮缘的轮廓。

Similar Words：

"线光谱" Chinese translation, "线光谱；线谱" Chinese translation, "线光谱光源" Chinese translation, "线光谱仪" Chinese translation, "线光污染源" Chinese translation, "线广告代理" Chinese translation, "线广交会" Chinese translation, "线规" Chinese translation, "线规板" Chinese translation, "线规编号" Chinese translation