Chinese translation for "缓冷"
|
- anneal
retarded cooling
slow cooling
Related Translations:
缓燃: deflagrationflame retardantflame-retardantslow burningslow combustion 缓凝: delayed coagulationinhibitslow setting 缓斜面: gently sloping surface 缓释剂: controlled release formulationsextended-release 脉濡缓: relaxed and soft pulsesoft and moderate pulse
- Example Sentences:
| 1. | Control cooled rail
缓冷法制钢轨 | | 2. | Double - deck stainless steel inner in heating section , and automatic radiator system fitting in sloww - cooling sect
加热段双层不锈钢内胆，缓冷段有自动散热系统装置。 | | 3. | Slow cooling section is next the fast cooling section , cooling tiles slowly by exchange heat between hot gas in the tunnel and the environment air , which is sucked into pipes stick in the tunnel and been heated there , and been sent to dryer to dry biscuits
缓冷段不直接打冷却风，它通过抽热风机将环境空气吸入,进入窑内导热良好的钢管，并将换热后的热空气送入干燥窑内,冷空气在换热过程中，使制品得到间接的冷却，让制品安全度过573的晶型转换阶段。 | | 4. | The welding performance of homemade wear - resistant cast steel has been studied base on the weldability tests , the repair welding procedures of wean - resistant cast steel ( abrasion - plates ) have been made up , the results show that satisfying repair welding quality can be attained with such welding conditions as the low hydrogenous alkalescent welding rod , preheating and slow cooling , strictly maintaining the interbedded temperature of 250 ~ 300 and controlling welding technique
通过对其焊接性能的试验研究，制定了该类铸钢件（磨耗板）的补焊工艺：低氢型碱性焊条，预热与缓冷相结合的工艺措施，严格控制层间温度( 250 ~ 300 )及焊接工艺规范，可获得满意的修复质量。 | | 5. | On the base of the analysis on the advanced technology of hard ferrite in foreign country , the main procedures of preparing hard ferrite pre - sintering material are determined as follows : first , the ferrite oxides coming from the main cold rolling line and strontium carbonate are conveyed to storage tank by gas power and weighed automatically according to the demands of constituent composition . and then they are mixed and grinded by using method of wet treatment . finally the mixtures is transported to the devices of storage by transporting pump
在分析国外先进的永磁铁氧体生产工艺的基础上，确定了生产高档永磁铁氧体预烧料的主要过程：首先，利用攀钢冷轧铁红为主要原料，将氧化铁红及碳酸锶采用气力输送至贮料料仓，经自动称量装置，按工艺配方称量后分别由氧化铁红及碳酸锶发送罐气力输送进入预混搅拌筒加水搅拌，然后再送入混磨机湿法混磨；最后，混合物经输送泵输送至料浆存储装置，经定量进料泵定量输送至回转窑进行湿法预烧，预烧料经缓冷至室温后，再球磨。 |
- Similar Words：
- "缓军之计" Chinese translation, "缓口气" Chinese translation, "缓浪" Chinese translation, "缓劳持" Chinese translation, "缓烙法" Chinese translation, "缓冷法制钢轨" Chinese translation, "缓冷工段" Chinese translation, "缓冷坑" Chinese translation, "缓冷坑盖" Chinese translation, "缓冷器" Chinese translation
|
|
|
