Chinese translation for "翼缘板"

boom plate
chord plate
flange plate
flange slab
frange plate

Example Sentences:

	1.	Cracks have been found in the flange and web splices at groove welds in at least four bridges . 至少在四座桥梁的翼缘板和腹板拼接坡口焊缝中发现了裂纹。
	2.	The behavior and performance of the cracked flange plates suggest that good levels of fracture toughness exist in the a 517 steel . 开裂的翼缘板的性能及使用状态说明A517钢的断裂韧性良好。
	3.	Outstanding width of flange 翼缘板外伸宽度57
	4.	Bottom flange plate 底翼缘板
	5.	The behavior and performance of the cracked flange plates suggest that good levels of fracture toughness exist in the a 517 steel 开裂的翼缘板的性能及使用状态说明a 517钢的断裂韧性良好。
	6.	With the backing force of hongrun steel company , our products cover various models of angle steel , channel steel , frange plate and i steel 依托唐山宏润钢铁有限公司的强大后盾，我们的产品包括全部系列型号的角钢、槽钢、翼缘板、工字钢等。
	7.	In elementary beam bending theory , it is assumed that the stresses are constant through the width of the beam . however , for the wide flange girders , the stresses are not uniform 按照初等梁理论即假定翼缘板具有无限抗剪刚度,宽翼缘箱梁在荷载作用下翼缘的正应力沿着宽度方向上是均匀分布的。
	8.	962m respectively ) . neighbouring segments are linked with bolts and welding . after the girders were segmented , guesseted plates were used with high - strength bolted oints to connect the web plates , and the higher and lower flange plates were butt - welded 相邻梁段之间的连接形式为栓焊混合型连接，采用节点板把腹板用高强螺栓连接后上、下翼缘板分别对焊。
	9.	At the end of this section the paper specifies three possible failure modes of the ultimate resistance , depending on the ratio between the flexural resistance of the flanges and the axial resistance of the bolts . this numerical analysis includes many nonlinear structure behaviors such as contact status nonlinearities , geometric nonlinearities and material nonlinearities 文章就连接翼缘板刚度的变化和设置加劲肋等构造措施对连接的高强度螺栓内力、翼缘板间的接触压力、撬力和节点刚度的影响进行了对比分析，并对有限元的计算结果进行了多项式拟合。

Similar Words：

"翼羽标牌" Chinese translation, "翼羽区" Chinese translation, "翼元宝鳊" Chinese translation, "翼缘" Chinese translation, "翼缘（指型钢的缘）" Chinese translation, "翼缘板外伸宽度" Chinese translation, "翼缘法孔型设计" Chinese translation, "翼缘钢" Chinese translation, "翼缘横断面" Chinese translation, "翼缘横截面" Chinese translation