Chinese translation for "胶粘度"

adhesion capacity
adhesion power
adhesive capacity
adhesiveness
gumminess

Example Sentences:

	1.	Soft soldering fluxes - test methods - assessment of tackiness of flux residues 软钎焊剂.试验方法.第14部分:钎焊剂残留物胶粘度测定
	2.	For sbs and sebs , especially sebs , the melt viscosity and the shear rate are inter - rated Sbs与sebs材料尤其是sebs材料的熔胶粘度melt viscosity与剪切率shear rate系系相关
	3.	Soft soldering fluxes ; test methods ; part 14 : assessment of tackiness of flux residues iso 9455 - 14 : 1991 ; german version en 29455 - 14 : 1993 软钎焊剂.试验方法.第14部分:钎焊剂残留物胶粘度测定
	4.	If the manufacturing temperature exceeds 200c , the melt viscosity will increase sbs molecules may result in arching which reduce the productivity 若加工温度超过200c ，熔胶粘度会上升sbs分子可能有架桥现象，因而降低生产率
	5.	If the materials are degraded in the event of high temperature and high shearing rate , the melt viscosity will decrease due to the breaking up of the molecular bonds 如果材料因高温或高剪切率加工而降解,熔胶粘度会因分子链断裂而降低
	6.	But , the melt viscosity of the sbs and sebs elastomers is highly affected by the shear rate inside the barrel but it is not sensitive to the temperature inside the barrel 但sbs与sebs弹体的熔胶粘度melt viscosity非常容易被炮筒内剪切率shear rate影响，反而对炮筒内的温度不太敏感
	7.	The effects of all kinds of factors and additives on the viscosity of the pvc paste and blends were sysmetically examined . viscosities , flame - retardant properties , surface resistances , mechanical performances of all the improved recipes were investigated . the cost of the improved recipes was largely fallen down and the compositive properties were better than those of the initial recipes 对各种因素和添加剂对pvc糊和覆盖胶粘度的影响，以及所有改进配方的粘度、阻燃性能、表面电阻和力学性能进行了详细的分析，最终得到了即能够大幅度降低成本又能够提高产品综合性能的配方。
	8.	The optimal preparing conditions were found to be as follows : the initial viscosity of cellulose xanthate ranging from 5 , 000 to 8 , 000 cst , the mixture of pump oil and chlorobenzene with a 6 : 1 mass ratio as disperse phase , the mass ratio of disperse phase to water phase at 6 : 1 , the mixing speed at 350 ~ 400 rpm 详细研究了一些影响复合微球形成的因素，得到较优的工艺条件为：纤维素黄原酸酯粘胶粘度为5000 8000cst ，分散相为6 : 1 ( w w )泵油和氯苯混合物，搅拌速度为350 400rpm 。

Similar Words：

"胶粘底布" Chinese translation, "胶粘地" Chinese translation, "胶粘地板做法" Chinese translation, "胶粘点测定仪" Chinese translation, "胶粘毒素" Chinese translation, "胶粘工艺" Chinese translation, "胶粘共聚物" Chinese translation, "胶粘广告纸" Chinese translation, "胶粘和坏接合" Chinese translation, "胶粘和机械接合" Chinese translation