| 1. | Methods of measuring decarburized depth for steel
钢件脱碳层深度的测量方法 |
| 2. | Permissible depth of flaw and decarburized layer
裂纹之容许深度及脱碳层 |
| 3. | Determination of depth of decarburization of steel
钢的脱碳层深度测定法 |
| 4. | Steels - determination of depth of decarburization
钢.脱碳层深度的测定 |
| 5. | Diameter tolerance ovality and average decarburized layer depth
偏圆度及脱碳层的平均深度 |
| 6. | Quick measurement on rolling element hardening decarbonization layer depth
滚动体淬火脱碳层深度快速测量 |
| 7. | The analyzing and countermeasure of decarbonization about 45 steel cold - rolled quality carbon structural steel sheets
45号钢冷轧薄钢板脱碳层超标的原因分析及对策 |
| 8. | Rapid heating rate and no decarburized zone due to heat treatment during austenization , the staying time between 850 to 1000 is only 5 to 10 second , thus no decarburized zone can be formed
在加热奥氏体化过程中，在850 - 1000温度范围内的停留时间只有5 - 10秒钟，因此，不会有热处理脱碳层。 |
| 9. | The hearth pressure , pipeline pressure and heat exchanger are protected and the important parameters are sent to the factory - level mis network . so far , with the said system , the purpose to improve the control accuracy and bloom heating quality , to
系统设计达到了提高控制精度、提高钢坯加热质量、减少氧化烧损、减少脱碳层厚度、减少环境污染,节约能源的目的,具有良好的经济效益和社会效益 |
