| 1. | These include gusset plates welded to the flange .
这些包括焊接到翼缘上的节点板。 |
| 2. | Three structures have exhibited cracking at the ends of flange gusset plates .
已有三个结构在翼缘节点板端部出现了裂纹。 |
| 3. | Cross beam gusset plate
横梁节点板 |
| 4. | This paper puts up a new method for installing steel beam joints on concrete structures by chemically - planted steel bars
摘要提出了在混凝土结构上化学植筋，再通过塞焊和灌浆安装钢梁节点板的新方法。 |
| 5. | The fatigue strength of bottom chord node board , which is sensitivity to fatigue , is calculated by fem method
在此基础上，确定了节点板疲劳计算应力。之后，对钢吊车桥架的下弦节点板进行了疲劳强度验算。 |
| 6. | A design approach to the 3d design of light steelwork is presented in this thesis . the intelligent design of the steelwork joint type and joint plate are studied
本文提出一种轻型钢结构的三维设计方法，着重研究节点和节点板的智能设计方法。 |
| 7. | Fatigue strength checking computations are carried out for this crane . it is incline to danger when fatigue strength of node board is calculated by pervasion angle in code
得出结论认为按《钢结构设计手册》中的扩散角计算节点板疲劳强度有时是偏于危险的。 |
| 8. | In order to study the temperature influence to the anchoring strength of chemically - planted steel bars , two group of tests for total four steel beam joints have been carried out
为了解施焊温度对化学植筋锚固强度的影响，现场进行了2组共4个节点板的抗剪承载力试验。 |
| 9. | The test results indicated that the mechanical properties of the steel beam joint fixed by chemically - planted steel bars are satisfying , its bearing capacity can satisfy the design requirement
结果表明，混凝土结构上通过化学植筋再塞焊安装的钢节点板的受力性能令人满意，其承载力能够满足设计要求。 |
| 10. | 962m respectively ) . neighbouring segments are linked with bolts and welding . after the girders were segmented , guesseted plates were used with high - strength bolted oints to connect the web plates , and the higher and lower flange plates were butt - welded
相邻梁段之间的连接形式为栓焊混合型连接，采用节点板把腹板用高强螺栓连接后上、下翼缘板分别对焊。 |
