Chinese translation for "节面"

[ jiémiàn ]
nodal section; nodal surface; pitch surface; [物理学] nodal plane

Example Sentences:

	1.	The np ii is the fault plane 走向为104的节面是断层面。
	2.	V - and ribbed belts drive - dynamic test to determine pitch zone location - part 1 : v - belts V带和多楔带传动测定节面位置的动态试验方法第1部分: v带
	3.	V - and ribbed belts drive - dynamic test to determine pitch zone location - part 2 : v - ribbed belts V带和多楔带传动测定节面位置的动态试验方法第2部分:多楔带
	4.	The normal levitation of nodal plane tested under ultrasonic dynamic contact action validates the normal dynamic contact model 用微位移测试仪实际测试夹心式换能器节面沿纵向上浮的实验证实了该模型的分析结论。
	5.	The t2 - t11 superior facets face up , back , and slightly laterally ; the inferior facets face down , forward , and slightly medially . this shape enables slight rotation in the thoracic spine 胸2 ~ 11的上关节突的关节面朝向后上方并轻度外旋，而下关节突的节面朝向前下方并轻度内旋。这样胸椎可以轻度的旋转。
	6.	The directivity shows that the np i is the fault plane , and that the earthquake ruptured unilaterally from the northeast to the southwest , nearly perpendicular to the strike of the java trench P波显示的方向性效应表明：走向为199的节面是断层面。破裂传播方向为自东北向西南方向，几乎垂直于爪哇海沟走向。
	7.	The source time function directivity is in accordance with the p waveform directivity , clearly showing that the nodal plane of strike 199 is the fault plane and that the earthquake ruptured unilaterally from the northeast to the southwest 震源时间函数的这种方向性效应与p波的方向性效应相一致，清楚地表明：走向为199的节面为断层面，地震是从东北向西南方向单侧破裂的。
	8.	We create a transducer model by software which name is pro / e , then carry out solution by leading it in another software which name is ansys . not only we gain the size of the transducer , but also make nodal section locate in carriage , and make design more easy and exact 本文用三维软件pro / e建立了换能器的模型,然后导入ansys中进行有限元分析,不仅确定了换能器的尺寸,同时还保证了换能器的节面正好位于支撑钢板的中间,使得设计更加容易和准确。
	9.	The ultrasonic dynamic contact of bolt - clamped transducer and rigid plane are modeled using hertzian contact theory , and the analyzing results reveal that the nodal plane of the bolt - clamped transducer is levitated in normal direction by the ultrasonic dynamic contact action , and the real area of contact of bolt - clamped transducer and rigid plane decreases in the same time 首先利用赫兹接触理论建立了夹心式换能器和刚性平面的超声动态接触模型。通过对模型进行分析、求解表明,在纵向超声频率动态接触作用下,换能器节面位置产生了上浮,换能器端面与刚性平面的动态真实接触面积比静态时减少了。

Similar Words：

"节煤器" Chinese translation, "节煤器工厂" Chinese translation, "节煤器节油器炉水预热器经济器" Chinese translation, "节门游乐园" Chinese translation, "节弥" Chinese translation, "节面角" Chinese translation, "节面角(伞齿轮的)" Chinese translation, "节面角距角桨叶安装角纵摇角" Chinese translation, "节面母线" Chinese translation, "节面曲线" Chinese translation