| 1. | Practical design method for bolt end plate joints of light steel structure
轻钢结构螺栓端板连接的实用设计方法 |
| 2. | Non - soldering and soldering compression fittings - stud ends for use with union nut ; design sheet
非钎焊和钎焊压合接头.与管接螺母使用的双头螺栓端部 |
| 3. | The extended end - plate connections is fit for installation and orientation , so it has been widely adopted in practice
螺栓端板连接由于其易于安装和定位，施工较方便而被广泛采用。 |
| 4. | Non - soldering compression fittings with cutting ring - double ended stud ends with parallel threads and shaft for stud ends type a
带切割环的非钎焊压合接头.柱螺栓端a型带平行螺纹和 |
| 5. | But proper design of the end - plate connection has good ductility and can be subjected to severe earthquake
而螺栓端板连接这种连接形式只要经过正确的设计，就能够表现出较好的延性，能够承受较大的地震荷载。 |
| 6. | Connections for general use and fluid power - ports and stud ends with iso 261 threads with elastomeric or metal - to - metal sealing - threaded ports
普通和液压传动用联接件.用iso 261弹性螺纹或金属与金属间密封的气门和双头螺栓端头.螺纹气门 |
| 7. | E connections for general use and fluid power - ports and stud ends with iso 261 threads with elastomeric or metal - to - metal sealing - stud ends with elastomeric sealing type e
普通和液压传动用联接件.用iso 261弹性螺纹或金属与金属间密封的气门和双头螺栓端头 |
| 8. | B connections for general use and fluid power - ports and stud ends with iso 261 threads with elastomeric or metal - to - metal sealing - stud ends with metal - to - metal sealing type b
普通和液压用联接结件.用iso 261螺纹的弹性或金属与金属间密封的气门和双头螺栓端头 |
| 9. | Three kinds of bolted extended end - plate connections are tested . a series of parameters representing connections behavior are investigated and compared between the three types of connections . 2
进行了三种螺栓端板连接节点的足尺试验，分析比较了它们的承载力、塑性变形能力等； 2 |
| 10. | The end - plate bolted connections are most calculated and designed as rigid connections in traditional designing , which leads to the significant difference between the calculation result and the real stressed state
摘要传统钢结构设计中将高强螺栓端板连接作为刚性节点，而实际情况下这种连接形式与计算结果有差异。 |
