| 1. | Overload current is not exceed allowable values
负载电流不应超过允许值。 |
| 2. | If the load excees 15a , the load must be controlled via contactor
如果负载电流超过15a ，应选用接触器进行控制。 |
| 3. | Moisture proof and no contact output , load current 1a max
具防潮功能并且采用无接点方式，限时控制负载电流最大1a |
| 4. | Percentage of current load
负载电流百分比显示 |
| 5. | Continuous load current
连续负载电流 |
| 6. | A 2kva prototype is built to verify the validity of the proposed inverter
通过一台2kva的原理样机，验证了该变换器的优点和负载电流前馈方法的有效性。 |
| 7. | Recommended practice for establishing transformer capability when supplying nonsinusoidal load currents
施加非正弦负载电流的变压器性能确定的推荐规程 |
| 8. | Recommended practice for establishing transformer capability when supplying nonsinusoidal load currents
施加非正弦负载电流时变压器性能确定的推荐实施规程 |
| 9. | Use a shielded cable with the high - level source circuit ' s return current carried in the shield ( figure 18 )
负载电流较大时，用屏蔽体来充当负载电流返回信号源的通道。 |
| 10. | Different type active power filters can compensate dynamic harmonic of dynamic load electrical current and the volt
不同类型的有源电网滤波器能对变化的负载电流进行动态谐波和无功补偿以及电压补偿。 |
