Chinese translation for "轴承间隙"

bearing clearance
bearing play
bearingclearance

Related Translations:

导线间隙:  conductor spacing

椭圆形间隙:  oval-clearance

间隙计:  clearance meter

间隙扫描:  gap scanning

左肋间隙:  left intercostal spacelics

防爆间隙:  flame-proof gap

间隙阴离子:  interstitial anion

圆周间隙:  circumferential clearanceperipheral clearance

时序间隙:  slot, time

基准间隙:  benchmark event

Example Sentences:

	1.	Measure the clearance of bearing by pressing lead wires 用压铅法测量轴承间隙。
	2.	Measuring clearance between propeller shaft & bearing 螺旋桨轴与轴承间隙测量。
	3.	Sliding frictions and bearing clearances inevitably leading to the gear vibration of a gearing 滑动摩擦及轴承间隙必导致齿轮机构的齿轮振动
	4.	The threshold speed and the typical characteristics of the oil whip of the system are simulated under the nonlinear model of oil film force , and the state of motion and type of the bifurcation are analyzed by floquet multiplicators which is computed by the shooting method . secondly , the the nonlinear dynamical model of the low - pressure rotor - bearing system by column bearing with reduced dimensions is presented . the numerical results show the rule of the amplitude with the eccentricity of rotor , the length - to - diameter ratio , oil viscosity and the clearance - to - radius ratio of the bearing under the definite speed 其次,对降维后的低压转子?轴承系统的非线性动力学方程,计算了圆柱瓦轴承支撑的转子系统的振动稳定性在固定转速下随偏心距、轴承长径比、润滑油动力粘度和轴承间隙比的变化规律,并分析了转子前轴承轴颈的失稳转速与转子偏心距、轴承长径比、润滑油动力粘度和轴承间隙比之间的关系,同时利用floquet理论分析其运动状态和分岔类型。
	5.	Abstract : guiding accuracy of casting mould depends on structure and oscillation parameters , such as elastic deformation of guiding leaf - springs , play of bearings between linkages , stroke and frequency of mould oscillation , etc . . in this paper , these factors are studied by means of kinetic and dynamic analysis of oscillating mechanism 文摘:通过对连铸机结晶器振动机构的运动学和动力学分析，研究了导向板弹簧的弹性变形、连杆轴承间隙等结构参数及振幅、振动频率等运动参数对结晶器仿弧误差的影响。

Similar Words：

"轴承架；泵托架" Chinese translation, "轴承架固定式泵" Chinese translation, "轴承架绝缘" Chinese translation, "轴承间距" Chinese translation, "轴承间距离" Chinese translation, "轴承检验所" Chinese translation, "轴承浇铸机" Chinese translation, "轴承铰链" Chinese translation, "轴承金属" Chinese translation, "轴承金属合金" Chinese translation