Chinese translation for "输入结构"

input structure

Example Sentences:

	1.	V and combining with the study of the terminal sliding mode , the design methods of an adaptive terminal smc is developed for a class of high - order nonlinear dynamic systems with input nonlinearity 同时还研究了非线性输入结构的参数不确定非线性系统的辨识问题，提出了一种新的基于滑模控制的参数辨识方法。
	2.	Eccentrically braced frames ( ebfs ) combines the strength and stiffness of concentrically braced frames ( cbfs ) with the inelastic behavior and energy dissipation of moment - resisting frames , especially inelastic deformation of link absorbs seismic energy 偏心支撑框架结合了中心支撑框架的强度、刚度高和普通抗弯框架的延性、耗能性能好的优点，通过耗能梁段的非弹性变形耗散大量输入结构的地震能量。
	3.	Time history analysis is carries on after the seismic waves being numbered according to period , input values of seismic wave to vibration equation of system , adopt the method of progressive integral to gain the whole course of the structure ' s state at the whole earthquake 时程分析是将地震波按时段进行数值化后，输入结构体系的振动微分方程，采用逐步积分法得出结构在整个地震时域中振动状态的全过程。
	4.	Under these assumptions , three kinds of excitations , namely , harmonic force with frequency equal to the structural fundamental frequency , harmonic force with frequency equal to half of the structural fundamental frequency and pulse force are inputted to the undamaged and damaged structures . then under the same excitation , the undamaged structural displacement responses , velocity responses , acceleration responses , jerk responses and responses of integrated displacement are compared with that of the damaged ones 在此假定基础上,分别将激励频率等于结构基频的简谐形激励、激励频率等于结构基频之半的简谐形激励和锤击激励输入结构,而后比较了损伤前后结构在相同激励下的位移响应、速度响应、加速度响应、加加速度响应和位移积分响应。
	5.	Considering that the unknown upper bound of uncertainties , which include parameter variations and external disturbances , we also propose a terminal smc technique with a simple adaptation laws to overcome the above limitation 4 . for a class of nonlinear dynamic systems with input nonlinearity , a new sliding mode controller is proposed to deal with the tracking problem 研究了一类带有非线性输入结构的非线性系统的变结构控制问题，提出了一种新的用于解决跟踪问题的滑模变结构控制设计方法。并进一步结合tenninal滑模控制的研究，探讨了一类带有非线性输入结构的多输入多输出高阶非线性系统的变结构控制设计问题。
	6.	The thesis has done the widespread investigation and study to the domestic and foreign ’ s technologies of analogy low voltage and low power , and analyzes the principles of work , merts and shortcomings of these technologies , based on the absorption of these technologies , it designs a 1 . 5v low power rail - to - rail cmos operational amplifier . when designing input stage , in order to enable the input common mode voltage range to achieve rail - to - rail , it does not use the traditional differential input pair , but use the nmos tube and the pmos tube parallel supplementary differential input pair to the structure , and uses the proportional current mirror technology to realize the constant transconductance of input stage . in the middle gain stage design , the current mirror load does not use the traditional standard cascode structure , but uses the low voltage , wide - swing casecode structure which is suitable to work in low voltage . when designing output stage , in order to enhance the efficiency , it uses the push - pull common source stage amplifier as the output stage , the output voltage swing basically reached rail - to - rail . the thesis changes the design of the traditional normal source based on the operational amplifier , uses the differential amplifier with current mirror load to design a normal current source . the normal current source provides the stable bias current and the bias voltage to the operational amplifier , so the stability of operational amplifier is guaranteed . the thesis uses the miller compensate technology with a adjusting zero resistance to compensate the operational amplifier 本论文对国内外的模拟低电压低功耗技术做了广泛的调查研究,分析了这些技术的工作原理和优缺点,在吸收这些技术成果基础上设计了一个1 . 5v低功耗轨至轨cmos运算放大器。在设计输入级时,为了使输入共模电压范围达到轨至轨,不是采用传统的差动输入结构,而是采用了nmos管和pmos管并联的互补差动输入对结构,并采用成比例的电流镜技术实现了输入级跨导的恒定;在中间增益级设计中,电流镜负载并不是采用传统的标准共源共栅结构,而是采用了适合在低压工作的低压宽摆幅共源共栅结构;在输出级设计时,为了提高效率,采用了推挽共源级放大器作为输出级,输出电压摆幅基本上达到了轨至轨;本论文改变传统基准源基于运放的设计,采用了带电流镜负载的差分放大器设计了一个基准电流源,给运放提供稳定的偏置电流和偏置电压,保证了运放的稳定性;并采用了带调零电阻的密勒补偿技术对运放进行频率补偿。
	7.	The vibration - reduction principle of viscous damper is to consume most portion of the input energy by viscous damping material during the earthquake and wind so as to diminish vibration response of structures and insure structures " safety , and this technique has been becoming one of the main tendency of earthquake - resistant engineering research 粘滞阻尼器的控振原理是通过粘滞阻尼来耗散输入结构的大部分振动能量，以减少结构的振动反应，保证结构在地震和风荷载作用下的安全；消能减震技术现已成为工程抗震研究的主要发展方向之一。
	8.	The primary contents and innovations of this article are introduced below . in order to take advantage of the high speed of calculation , and at the same time , improve the accuracy and dynamic - range of the algorithm , three kinds of multi - input floating point adder algorithm ( fpa ) are summarized and a high - performance multi - input fpa structure is put forward with a self - defined floating point format . the performance of the high - performance structure on calculation speed and logic resource consuming is better than the normal structure 论文的主要工作及创新点如下:为了充分利用fpga处理速度快的特点,同时尽量提高算法的精度及动态范围,本文在对浮点加法器算法进行深入研究的基础上,规纳总结了三种不同的多输入浮点加法器算法,并创造性地提出了一种高效的多输入浮点加法器结构及一种适合于fpga实现的自定义浮点数格式,这种高效的结构在所需的逻辑资源和运算速度上均远优于传统的多输入结构。

Similar Words：

"输入接线盒" Chinese translation, "输入接线柱" Chinese translation, "输入阶段" Chinese translation, "输入节点" Chinese translation, "输入节点状态" Chinese translation, "输入结束" Chinese translation, "输入解耦零点" Chinese translation, "输入借方头寸贬值" Chinese translation, "输入借位" Chinese translation, "输入进程" Chinese translation