Chinese translation for "输出光束"
|
- output beam
Related Translations:
调制光束: modulated beam of lightmodulated light beam 锥形光束: cone shaped beamcone-shaped beamconical beampencil-beam light 照射光束: illuminating beamilluminating laser beam
- Example Sentences:
| 1. | Calculations show that the near - field profile of the output beam is strong function of the laser launching conditions
计算表明，激光入射条件与光纤输出光束的近场功率密度分布有着函数关系。 | | 2. | How to improve the output energy and beam quality were two most noteworthy problems in the building of high power solid - state laser facility
提高系统能量转换效率与输出光束质量一直是研制高功率固体激光系统极为关注的两类重要问题。 | | 3. | ( 3 ) the thickness of the liquid crystal and the arrangement of liquid crystal molecule are flexible , there are no deviation in the outgoing beams
摘要第2页3 、滤光片中的液晶厚度、液晶分子的排列方向比较灵活，输出光束不发生偏离。 | | 4. | Under the weakly guiding approximation , we derive the electric - field distribution of the lp01 mode in the hollow fiber . the far - and near - field distribution of the lp01 - mode output beam in free space is calculated numerically from fraunhofer and fressnel diffraction theory
在弱波导近似下导出了中空光纤中lp _ ( 01 )模的电场分布，数值推算了lp _ ( 01 )模输出光束的远场和近场分布。 | | 5. | In fast axis the divergentce of each beam is 0 . 28o , in slow axis is 1 . 4o , the area of field from the end of ld stack 20cm is 42 25mm2 , average wave is 9 . 3 % . so , it can meet the requirement of pumping , and the effect is fairly good
具体数据为:各输出光束在快轴方向的发散角为0 . 28o ,在慢轴方向的发散角为1 . 4o ,输出光场在距ld面阵发射端面20cm处的面积为42 25mm2 ,平均波纹起伏为9 . 3 % ,可见整形效果较好 | | 6. | Applying 200 m quartz fibers in the ld - pumped laser system with double - pass configuration , 57 % sbs reflectivity , near 92 % sbs fidelity and 85 % relative stability have been obtained . and high beam quality of phase - conjugated laser close to that of oscillator has been achieved
应用200 m光纤经双通放大最高可获得57的能量反射率、 85的相对稳定性以及92的相位共轭保真度，并观察到激光系统的输出光束质量被显著改善。 | | 7. | High power diode laser array coupling with optical fiber not only make the use of diode laser easier , but also improve the dissymmetry of its output light beam and in the meantime , the output light coupling between the ld sources becomes easier and the power becomes higher
大功率半导体激光器采用光纤耦合输出方式不仅简化了器件的应用,改善了输出光束的非对称性,同时还可以简便地实现多个半导体激光器的光源之间的输出光耦合或组合,得到更高的功率输出。 | | 8. | Due to the inevitable absorption of crystal window , the crystal window will be distorted even burst while the power of high energy laser apparatus is several hundred thousand watt even mega - watt , so the quality of laser beam will be influenced and the laser apparatus will not work properly
由于晶体材料窗口不可避免的部分吸收作用，对于目前几十万瓦甚至兆瓦级的高能激光器来说，晶体窗口会产生热畸变甚至炸裂，从而影响输出光束质量甚至使激光器根本无法工作。 | | 9. | 3 . because traditional coupling system composed with cylinder lens and focus lens has the disadvantages of difficult to encapsulation and modulate , a new practical method brings forward : the output light from laser diode is collimated using a section of optical fiber with the diameter of 600 m instead of cylinder lens , and a sphere ? end lens
3 .针对由柱透镜和聚焦透镜组成的组合透镜耦合系统中存在的封装和调试困难等问题,提出了:用一段直径为600 m的裸石英光纤代替柱透镜,对半导体激光器输出光束进行准直整形;用球透镜光纤对准直后的光束进行聚焦,直接实现和光纤耦合,来代替聚焦透镜和光纤耦合的环节。 | | 10. | The theoretical analysis shows that mz - ifog can be used to detect the rotation rate of moving objects . a systematic analysis of transfer characteristics of mz - ifog is made . performance - limiting factors , including the path - length difference , the disturbance of temperature fluctuation and stress from working environment , the quality of light source , are all discussed along with methods to reduce their effect on the output signal
本文用系统的方法分析了mz型干涉式光纤陀螺仪的光传输特征,指出了其较大的非互易性因素-臂长差的存在,分析了工作环境因素(温度,应力) 、光源质量(输出光束中心波长、光功率波动及偏振态波动)对系统工作性能的影响,并指出了减少系统非互易因素、抑制噪声、提高检测稳定性的措施。 |
- Similar Words：
- "输出管道" Chinese translation, "输出管路" Chinese translation, "输出管输送管" Chinese translation, "输出管制" Chinese translation, "输出光功率" Chinese translation, "输出光束功率" Chinese translation, "输出光束能量" Chinese translation, "输出光束耦合" Chinese translation, "输出光通量" Chinese translation, "输出光栅" Chinese translation
|
|
|
