Chinese translation for "输出流量"
|
- delivery rate
output flow
Related Translations:
估计流量: estimated dischargeestimated flow 流量分析: flow analysistraffic analysisweb analyticweb traffice analysis 电磁流量: electromagnetic flow 流量单位: fluid unitsflux unitmodule 附面层流量: boundary layer flux
- Example Sentences:
| 1. | Oilfree air generators outflow volume
空气发生器输出流量 | | 2. | Gas purge generators outflow volume
气体净化器输出流量 | | 3. | Nitrogen generators outflow rate
氮气发生器输出流量 | | 4. | This hydraulic system is controlled by different pump ' s flowrate , which is realized by changing the speed of the pump , instead of changing pump ' s displacement
这种系统不是靠改变泵的排量而是靠改变泵的转速来改变其输出流量,从而实现对液压系统的控制。 | | 5. | Scm as control core applied in the variable axial piston pump is introduced briefly in the paper , including structure and work principle
摘要本文介绍了基于单片机控制的数字变量轴向柱塞泵的结构组成、工作原理，并理论推导了数字泵的输出流量与输入脉冲信号呈线性关系。 | | 6. | The following is the detail design of the pump , and a optimum mathematical model are presented to mostly reduce the helical gear pump flow pulse
在此基础上进行了斜齿齿轮泵的结构设计，通过建立斜齿齿轮泵齿轮的优化数学模型，优化计算出使输出流量脉动最小的斜齿轮参数，制造出斜齿齿轮泵样机。 | | 7. | At last considering the flow pulsation as objective function , optimization of the parameters of the gear using ga method is brought forward and an optimum model is presented to achieve the optimal parameters of the gear that make the flow pulsation lowest
最后以流量脉动为目标函数,采用遗传算法对齿轮泵结构参数进行了优化设计,建立了齿轮泵参数优化数学模型,给出了使输出流量脉动最小的齿轮泵最优参数。 | | 8. | That is , through analysis of the principle on flow control and " hydraulic transistor " , design and calculation of flow control characteristic as well as main parts in valve inner chamber , a piloted reducing valve will be installed between main valve and pilot valve . after a pressure - difference compensating reducing valve was added in the non - pressure compensating piloted reducing valve of the flow control valve in vlalvistor valve , the calculation on control characteristic emulation and load characteristic emulation has been carried out . the result of the calculation shows that after pressure compensating reducing valve was added , the linearity of the control characteristics has been greatly improved thus eliminating influence upon outlet flow by load pressure - change of the hydraulic system and improving performance characteristics of the hydraulic component
文章还在对瑞典valvistor阀的插装比例阀研究的基础上，提出了一种新的流量控制原理，即：通过对流量控制和“液压晶体管”原理的分析、流量控制特性及阀内腔主要结构件的设计计算，在主阀和导阀之间增设先导减压阀，并进一步对valvistor阀的流量控制阀之无压力补偿先导减压阀、加入压差补偿减压阀后的控制特性进行了仿真计算和负载特性仿真计算，结果表明：增设压力补偿先导增压阀后，其控制特性曲线变得非常线性，从而消除了液压系统负载压力变化对主阀输出流量的影响。 | | 9. | In this paper , some off - line manual methods for regulation of flow equation have been compared and analyzed . based on pid speed governor of turbines , two kinds of governors are designed for adjustable - blade pump , which can perform autoregulation on water height of the fore bay and on pump output by adjusting the blade angle of adjustable - blade pump . the computation models of the two kinds of governors are also offered and the transient simulation can be done on pc
文中，比较分析了现有的多种离线手动调节流量平衡的方法，在水轮机pid调速器的基础上，针对转桨泵设计了两种新型调节器，通过改变转桨泵的叶片安放角，分别能对泵站前池水位和泵的输出流量进行自动调节；提出了两种新型调节器的计算模型，使转桨泵在线自动调节动态仿真得以在微机上得以实现。 | | 10. | In this paper , on the basis of the analysis of gear pimp working principle , the mechanism of flow pulsation and methods of reducing flow pulsation are pulsation are studied . the computing formula of transient flow rate and the coefficient of flow pulsation are deduced . the relationship between the gear pump flow pulsation and the construction parameters of the gear is studied
本文在齿轮泵工作原理和流量脉动产生机理的基础上,首先从理论上推导了齿轮泵瞬时流量和流量脉动系数的数学模型,分析了齿轮泵的输出流量脉动与泵齿轮各结构参数之间的关系,并对某型齿轮泵进行仿真分析研究,给出了齿轮泵的流量脉动分析结果。 |
- Similar Words：
- "输出列印伫列" Chinese translation, "输出淋巴管" Chinese translation, "输出流" Chinese translation, "输出流控制" Chinese translation, "输出流类型" Chinese translation, "输出流量范围" Chinese translation, "输出流量控制" Chinese translation, "输出漏斗" Chinese translation, "输出路径" Chinese translation, "输出路线" Chinese translation
|
|
|
